LIVE METAR

Turkey Airport Map

Turkey-specific page: the data here covers airports in Turkey. For airports elsewhere, see the World Airports Map.

World Airports Map: 10,000+ airports →

57 Live METAR and TAF for the aerodrome on one map: VMC and IMC status per SERA/SHGM requirements, wind, visibility, ceiling and crosswind by runway.

38VMC aerodrome
6IMC aerodrome
02:02Z · 05:02 TRTLast updated · refreshes every 10 min
Conditions
Valid in Türkiye: visibility ≥ 5 km and ceiling ≥ 1500 ft → VMC Ground
Time
Now · METAR
Rules and disclaimerThe map is for training and general information; for pre-flight briefing, the official METAR/TAF, NOTAM and AIP are essential. SERA/SHGM (SERA.5005(b), aerodrome in a control zone): VMC = surface visibility ≥ 5 km and ceiling ≥ 1500 ft; otherwise IMC. Special VFR (SVFR): visibility ≥ 1500 m and ceiling ≥ 600 ft, with ATC clearance.

Live METAR question

The question is generated from current live METARs. Loading…

Current SIGMETs · Ankara and Istanbul FIR

  • There are currently no valid SIGMETs for the Ankara and Istanbul FIRs.

Source: aviationweather.gov international SIGMET service, refreshed every 15 minutes. FIR boundaries: VATSpy Data Project (CC BY-SA 4.0), approximate; official boundaries are in AIP Türkiye ENR 2.1.

All aerodromes

ICAOAirportCat. WindBest runway VisibilityCeiling °CQNH
LTCD Erzincan Havalimani IMC Calm — 1,400 m 9,000 ft 5° 1018
LTCS Sanliurfa GAP Havalimani IMC 150° / 3 kt 22 · xwind 3 kt 500 m 200 ft 13° 1019
LTAC Ankara Esenboga Havalimani IMC 140° / 3 kt 21L · xwind 3 kt 3,000 m None 6° 1014
LTCC Diyarbakir Havalimani IMC Calm — 2,500 m None 10° 1019
LTCN Kahramanmaras Havalimani IMC 160° / 3 kt 08 · xwind 3 kt 4,000 m 3,000 ft 14° 1018
LTCV Sirnak Serafettin Elci Havalimani IMC 180° / 4 kt 11 · xwind 4 kt 4,500 m 2,500 ft 12° 1020
LTAF Adana Sakirpasa Havalimani VMC Calm — 6 km None 14° 1016
LTAI Antalya Havalimani VMC 330° / 5 kt 36C · xwind 3 kt 10+ km 2,500 ft 17° 1016
LTAJ Gaziantep Havalimani VMC 220° / 8 kt 28R · xwind 7 kt 7 km 2,000 ft 15° 1018
LTAN Konya Havalimani VMC 100° / 4 kt 01L · xwind 4 kt 8 km None 6° 1016
LTAU Kayseri Havalimani VMC 040° / 4 kt 07 · xwind 2 kt 8 km None 5° 1017
LTBY Eskisehir Hasan Polatkan Havalimani VMC Variable / 3 kt — 6 km None 8° 1013
LTCF Kars Havalimani VMC 280° / 6 kt 24 · xwind 4 kt 10+ km 2,500 ft 3° 1018
LTCR Mardin Havalimani VMC 110° / 3 kt 03 · xwind 3 kt 10+ km 3,000 ft 14° 1019
LTCT Igdir Havalimani VMC 140° / 9 kt 12 · xwind 3 kt 7 km 3,500 ft 7° 1017
LTDB Cukurova Uluslararasi Havalimani VMC 330° / 2 kt 03L · xwind 2 kt 8 km None 13° 1016
LTFE Milas-Bodrum Havalimani VMC Calm — 7 km None 15° 1015
LTAP Amasya Merzifon Havalimani VMC Calm — 10+ km None 7° 1012
LTAR Sivas Nuri Demirag Havalimani VMC 210° / 8 kt 19 · xwind 2 kt 10+ km 3,500 ft 7° 1018
LTAT Malatya Havalimani VMC Variable / 1 kt — 10+ km None 9° 1018
LTAY Denizli Cardak Havalimani VMC 230° / 9 kt 23 · xwind 1 kt 10+ km None 13° 1016
LTAZ Nevsehir Kapadokya Havalimani VMC 130° / 10 kt 11 · xwind 2 kt 10+ km None 9° 1016
LTBA Istanbul Ataturk Havalimani VMC 210° / 21 kt 23 · xwind 10 kt 10+ km None 19° 1005
LTBF Balikesir Merkez Havalimani VMC Variable / 1 kt — 10+ km None 15° 1010
LTBH Canakkale Havalimani VMC 190° / 14 kt 22 · xwind 7 kt 10+ km None 21° 1006
LTBJ Izmir Adnan Menderes Havalimani VMC 140° / 9 kt 16L · xwind 4 kt 10+ km None 18° 1013
LTBQ Kocaeli Cengiz Topel Havalimani VMC Variable / 3 kt — 10+ km None 11° 1007
LTBR Bursa Yenisehir Havalimani VMC 150° / 4 kt 07R · xwind 4 kt 10+ km None 10° 1008
LTBS Dalaman Havalimani VMC 020° / 5 kt 01 · xwind 0 kt 10+ km None 15° 1016
LTBU Tekirdag Corlu Havalimani VMC 220° / 19 kt 22 · xwind 3 kt 10+ km None 18° 1004
LTCA Elazig Havalimani VMC 240° / 5 kt 25 · xwind 1 kt 10+ km None 7° 1018
LTCB Ordu-Giresun Havalimani VMC Variable / 2 kt — 10+ km None 13° 1012
LTCE Erzurum Havalimani VMC 260° / 10 kt 26R · xwind 1 kt 10+ km None 4° 1019
LTCG Trabzon Havalimani VMC 200° / 1 kt 11 · xwind 1 kt 10+ km 8,000 ft 13° 1014
LTCI Van Ferit Melen Havalimani VMC 180° / 6 kt 21 · xwind 4 kt 10+ km 7,000 ft 11° 1020
LTCJ Batman Havalimani VMC 050° / 3 kt 02 · xwind 1 kt 10+ km 10,000 ft 13° 1019
LTDA Hatay Havalimani VMC 210° / 14 kt 22 · xwind 3 kt 10+ km 3,500 ft 20° 1016
LTFC Isparta Suleyman Demirel Havalimani VMC Variable / 2 kt — 10+ km None 5° 1018
LTFD Balikesir Koca Seyit Havalimani VMC 260° / 9 kt 23 · xwind 4 kt 10+ km None 19° 1010
LTFG Gazipasa-Alanya Havalimani VMC 120° / 5 kt 08 · xwind 3 kt 10+ km None 15° 1017
LTFH Samsun Carsamba Havalimani VMC 090° / 4 kt 13 · xwind 3 kt 10+ km None 11° 1010
LTFJ Istanbul Sabiha Gokcen Havalimani VMC 230° / 14 kt 24L · xwind 3 kt 10+ km None 20° 1006
LTFM Istanbul Havalimani VMC 210° / 24 kt 18 · xwind 12 kt 10+ km None 19° 1004
LTFO Rize-Artvin Havalimani VMC 080° / 4 kt 06 · xwind 1 kt 10+ km None 12° 1014
LTAL Kastamonu Havalimani NO DATA No METAR · TAF forecast: VMC
LTAS Zonguldak Caycuma Havalimani NO DATA No METAR · TAF forecast: VMC
LTAW Tokat Havalimani NO DATA No METAR · TAF forecast: VMC
LTBO Usak Havalimani NO DATA No METAR · TAF forecast: VMC
LTBZ Kutahya Zafer Havalimani NO DATA No METAR · TAF forecast: VMC
LTCK Mus Havalimani NO DATA No METAR · TAF forecast: VMC
LTCL Siirt Havalimani NO DATA No METAR · TAF forecast: VMC
LTCM Sinop Havalimani NO DATA No METAR · TAF forecast: VMC
LTCO Agri Havalimani NO DATA No METAR · TAF forecast: VMC
LTCP Adiyaman Havalimani NO DATA No METAR · TAF forecast: VMC
LTCU Bingol Havalimani NO DATA No METAR published in the last 6 hours
LTCW Hakkari Yuksekova Havalimani NO DATA No METAR · TAF forecast: IMC
LTFK Canakkale Gokceada Havalimani NO DATA No METAR · TAF forecast: VMC

Airports without a current (last 3 hours) METAR are shown on the map in faded colour or with a dashed ring: LTAL, LTAS, LTAW, LTBO, LTBZ, LTCK, LTCL, LTCM, LTCO, LTCP, LTCU, LTCW, LTFK.

Frequently asked questions

What do VMC and IMC mean? Which conditions does the map use?

VMC (visual meteorological conditions) and IMC (instrument meteorological conditions) are determined under the SERA rules applied by SHGM in Türkiye. For aerodromes on the map, and for aerodromes in a control zone, the SERA.5005(b) criteria apply: if surface visibility is at least 5 km and the ceiling (BKN/OVC or vertical visibility) is at least 1500 ft, it is VMC; if either is not met, it is IMC. In IMC, if visibility is at least 1500 m and the ceiling is at least 600 ft, a "Special VFR (SVFR) conditions met" note appears on the chart; SVFR requires ATC clearance. For additional conditions such as airspace class, cloud distance and night rules, SERA and AIP Türkiye are essential.

What are VFR, MVFR, IFR and LIFR, and can I see them on the map?

These four categories are the US FAA classification and are not used as flight rules in Türkiye. As they are often seen in international sources, they can be displayed by selecting "FAA" in the "Conditions" setting above the map: VFR ceiling above 3000 ft and visibility above 5 miles (≈8 km); MVFR ceiling 1000–3000 ft or visibility 3–5 miles; IFR ceiling 500–999 ft or visibility 1–3 miles; LIFR ceiling below 500 ft or visibility below 1 mile (≈1.6 km). The choice is saved in your browser.

How often is the map data updated?

The data are official METAR reports from aviationweather.gov and refresh every 10 minutes. METARs are usually issued every half hour or hour at most airports. Airports whose report is older than 3 hours are shown on the map in faded colour with an “OLD” label. Airports that have issued no report in the last 6 hours are shown as a dashed grey ring (“NO DATA”); where a TAF exists for these airports, the ring is coloured according to the TAF's current forecast. Airports without a reported visibility are assessed on ceiling alone and a warning appears on the card.

How do I read the TAF on the airport card?

In the TAF tab of the aerodrome card that opens when you tap an aerodrome, the raw TAF and an hour-by-hour colour bar for the next 24 hours appear: the bar's colour shows the prevailing forecast (FM/BECMG), while the thin strip above shows the worse condition expected in TEMPO/PROB groups. During the BECMG transition window, the worse of the old and new conditions is shown. TAFs are refreshed every 30 minutes.

What does the TAF time slider show?

When the “Time” setting on the map is set between +1 and +23 hours, the points are coloured according to the TAF forecast for that hour. The fill colour shows the prevailing forecast (FM/BECMG), while the outer ring shows the worse condition expected in TEMPO or PROB groups. Airports that do not publish a TAF remain as a dashed grey ring.

What are the SIGMET and FIR layers?

SIGMET is a warning issued for weather phenomena affecting flight safety, such as thunderstorms, severe turbulence, icing, mountain waves and volcanic ash. On the map, valid SIGMETs in the Ankara (LTAA) and Istanbul (LTBB) FIRs are drawn as coloured areas; tapping an area shows the level, validity and raw text. FIR boundaries are approximate; official boundaries are in AIP Türkiye ENR 2.1.

How is the past 6 hours shown?

When you set the time to between −1 and −6 hours, the map is drawn using the METARs of that time; all layers (category, wind, visibility, ceiling, fog risk, isobars) work with historical data. The “Last 6 hours” band on the airport card also shows the category of each report in sequence. In this way, the formation of fog or the passage of a front can be followed hour by hour.

How is fog risk calculated?

When the difference between temperature and dew point falls to 2°C or below, the air approaches saturation; if the wind is 7 kt or below, the risk is considered “high”. A difference of 3–4°C is considered “low”, and above 4°C “none”. If the report includes fog (FG) or mist (BR), the airport is shown in a separate colour. Because radiation cooling can close the gap quickly at night, particular attention should be paid to “medium” and “high” airports in the evening.

How is density altitude calculated?

First the pressure altitude is found: airport elevation + (1013,25 − QNH) × 27 ft. Then the deviation of temperature from ISA is added: density altitude = pressure altitude + 120 × (temperature − ISA temperature); ISA temperature = 15 − 2 × (pressure altitude / 1000) °C. In hot weather and at high airports (such as Kayseri, Erzurum, Van), density altitude rises far above the elevation; take-off distance increases and climb performance decreases. The value is approximate; the aircraft's POH/AFM tables are essential for performance calculations.

Why are some aerodromes shown as diamonds (◆) on the map?

So that colour-blind users can also tell them apart, IMC airports (IFR and LIFR in the FAA view) are drawn as diamonds instead of circles. The airport card also shows sunrise, sunset and the end of civil twilight (TRT); a warning appears 90 minutes or less before night or sunset.

What are the mountain shadows and ▲ symbols on the map?

The shaded relief on the ground is produced from NOAA's ETOPO1 global elevation data (approximately 1,85 km resolution) and shows the location of mountains, plains and valleys. At this resolution, peaks appear lower because they are smoothed; therefore the map is for recognising terrain, not for reading elevations. The ▲ symbols are major peaks; tapping one shows the official elevation (m and ft), the nearest airport and how much higher it is than that airport. For terrain and obstacle heights in flight, VFR charts, the AIP and minimum safe altitudes are essential.

How do I see terrain elevation on the map?

When you hover over the map on a computer, or tap an empty spot on a phone, the coordinates and approximate terrain elevation (ft and m) of that point appear. The aerodrome card also shows the highest terrain within 25 NM. Values are calculated from the highest point in approximately 5,5 km squares, and the official elevation of known peaks is also taken into account. This is not a minimum safe altitude (MSA); obstacles (masts, towers) are not included. In flight, VFR charts, and the MSA and minimum altitudes in the AIP, are essential.

What is the difference between the “Dark” and “Map” background?

The dark background suits night use and makes coloured aerodrome points stand out. The map background shows elevation with colours, as on ICAO 1:500.000 VFR charts: green plains, yellow-brown plateaus, dark brown mountains. The choice is saved in your browser. Lakes, rivers and city names come from Natural Earth data; city names increase as you zoom in.

What is the dark area on the map?

The "Day / night" layer darkens the area in night based on the sun's current position; civil twilight (sun 0–6° below the horizon) is shown with a soft transition. When the time setting is moved forward or back, the shadow is drawn for that time. VFR night rules begin when civil twilight ends; the exact sunset and twilight times for the aerodrome are shown on its card.

What does the "Clouds (satellite)" layer show?

A cloud layer produced from the infrared (10,8 µm) image of EUMETSAT's Meteosat satellite; it works the same by day and night. Cold (high and thick) clouds appear whiter and more opaque, while low and thin clouds look paler; the ground remains visible in clear skies. Hourly frames are used and the last 6 hours can be played with "▶". In infrared imagery, fog and very low stratus may be invisible as they are at the same temperature as the ground; for these, see METAR, TAF and the "Fog risk" layer.

What is "Wind flow"?

This is an approximate wind field calculated from surface wind in aerodrome METARs, weighted by distance; lines flow in the direction the wind blows and move faster in stronger wind. Flow is not shown at places more than approximately 150 km from aerodromes. It does not show local effects such as mountains, valleys and sea breezes, nor upper-level winds; it is a training visualisation.

What does the radar layer show?

Shows precipitation (rain, snow, hail) measured by weather radars for the last 2 hours in 10-minute frames; use "▶ last 2 h" to watch movement. The darker the colour, the heavier the precipitation. Data comes from RainViewer, which combines national radar networks. It shows precipitation, not cloud: fog, mist and low cloud are not visible on radar, so check METAR and TAF for those. Light precipitation may be missed behind mountains or far from the radar, as the radar beam rises with distance.

What are isobar lines?

These are lines joining points with the same pressure value. The isobars on the map are calculated from the QNH values of airports by inverse distance weighted interpolation, so they are approximate. “Y” marks a high-pressure centre and “A” a low-pressure centre. Where the isobars crowd together, the wind strengthens; in the northern hemisphere, the wind blows with low pressure on its left.

How do favourite airport notifications work?

When you add up to 10 airports to favourites with the ☆ on the airport card and tap “Enable notifications”, your browser sends a notification when an airport's flight category changes (e.g. IMC → VMC; MVFR → VFR if FAA is selected). It works even when the page is closed. On iPhone, you need to add the site to your Home Screen from Safari and open it from there. Favourites are stored only in your browser.

How do personal limits work?

In the “Personal limits” layer you enter your own crosswind, total wind, gust, visibility and ceiling limits; each airport appears green (suitable), orange (marginal, within 20% of a limit) or red (not suitable) according to these limits. Thunderstorms, CB and freezing precipitation are always treated as “not suitable”. Limits are stored only in your browser.

How is crosswind calculated?

For each aerodrome, the wind direction and speed (gust speed if gusting) are compared with all runway thresholds; the runway with no tailwind and the lowest crosswind is shown as the "best runway". Runway headings come from OurAirports open data; the official source is AIP Türkiye.