TAF Trainer: Read the Weather in Advance

Read a real TAF and answer hour-by-hour questions: what is the visibility at 13:00 UTC, when does BECMG end, what is the worst case in TEMPO, and what is the earliest time to depart under VFR? After each answer, the relevant TAF group is highlighted on the TAF and shown on the timeline.

PPLATPLMeteorologyTAF
In short: How is the TAF read?

TAF (Terminal Aerodrome Forecast) is a 9–30 hour weather forecast for an aerodrome. After the validity group (e.g. 2712/2818) comes the main forecast; FM starts a completely new forecast, BECMG indicates a permanent change within the period, TEMPO temporary fluctuations, and PROB30/PROB40 probability. For the weather at a specific time, apply the main forecast with FM and completed BECMGs; TEMPO and PROB represent possible deterioration.

TAF selection

VFR comfortableMarginalBelow VFR minimum (5 km / 1500 ft)TEMPO/PROB below minima

The timeline is blurred until you answer the question so it does not give away the answer. If you wish open now.

TAF worksheet
2706/2715Validity: 27th 06:00 – 27th 15:00 UTC
FM271200Completely new forecast from 12:00; previous ones invalid
BECMG 2708/2710Gradual, permanent change at any time between 08 and 10; definite after 10
TEMPO 2712/2716Temporary fluctuations between 12–16 (each lasting less than 1 hour)
PROB30 / PROB4030% / 40% probability; PROB30 TEMPO probability temporary change
9999 · CAVOK · NSW10 km+ visibility · visibility/cloud/weather OK · significant weather ending
BKN012CB5–7/8 cloud cover, base 1200 ft, cumulonimbus
TX28/2712Z TN14/2704ZHighest / lowest temperature and times

How does it work?

The TAF is parsed group by group: validity period, main forecast, FM, BECMG, TEMPO and PROB groups. Questions are generated automatically from this structure; no question is asked for a group not present in the TAF. For the answer at a specific hour, the main forecast valid at that hour (with FM and completed BECMGs applied) is used; TEMPO/PROB questions look at the temporary groups covering that hour. The timeline colours each hour according to the 5 km / 1500 ft VFR minimum.

Test yourself

TAF and METAR reading questions frequently appear in the Meteorology subject of the PPL and ATPL exams.

Practice ATPL questions →

This simulator is for training only. Values are representative and do not replace the aircraft’s official POH/AFM, the AIP or current weather information in real flight operations. The pilot in command is always responsible.

TAF Trainer: Read the Weather in Advance: the full explanation

Published: · Updated: · By: Son Yaklaşma editorial team

What is TAF?

TAF (Terminal Aerodrome Forecast) is the weather forecast issued for an aerodrome for the next 9 to 30 hours. While METAR gives the current observation, TAF tells you what the weather will be at departure, arrival and alternate aerodromes at the planned time of flight. That is why it is the key document for pre-flight planning. Its format resembles METAR, but it also describes changes with time groups.

Example TAF, group by group: TAF LTFJ 271100Z 2712/2818 04015KT 9999 SCT025 FM271800 22010KT 6000 -RA BKN015 PROB40 2721/2803 2500 RA BKN008 BECMG 2805/2807 32012KT 9999 FEW030
GroupMeaning
TAFReport type (AMD: amended, COR: corrected).
LTFJICAO code of the aerodrome.
271100ZIssue time: 11:00 UTC on the 27th of the month.
2712/2818Validity: 12:00 UTC on the 27th to 18:00 UTC on the 28th (up to 30 hours).
04015KT 9999 SCT025Main forecast: wind 040° 15 kt, visibility 10 km or more, scattered cloud at 2500 ft.
FM271800 22010KT 6000 -RA BKN015Completely new forecast from 18:00; previous conditions are superseded.
PROB40 2721/2803 2500 RA BKN008Between 21:00 and 03:00, 40% probability of visibility 2500 m and ceiling 800 ft.
BECMG 2805/2807 32012KT 9999 FEW030Permanent change at some point between 05:00 and 07:00; definite after 07:00.

Change groups: FM, BECMG, TEMPO, PROB

TAF change indicators
IndicatorMeaningIn planning
FMCompletely new forecast from the stated timeThe previous main forecast and changes are no longer valid.
BECMGPermanent change beginning at any time within the periodBoth old and new values are possible during the period; plan for the worse.
TEMPOTemporary fluctuations (each under 1 hour, total less than half the period)The main forecast resumes when the period ends. If below minimums, an alternate is required.
PROB30 / PROB40Condition occurring with 30% / 40% probabilityIf PROB40 is below minimums, treat it as TEMPO; note PROB30.
PROB30 TEMPOProbable temporary changeOften used for short-lived but hazardous events such as thunderstorms.

How to find the weather at a specific time

  1. Is it within validity? If the time is outside the validity group, this TAF says nothing for that time.
  2. Start from the main forecast. The groups immediately following the validity are the starting conditions.
  3. Apply FM and completed BECMGs. FMs that have started by that time replace the main forecast entirely, while completed BECMGs change only the elements they give.
  4. Check the TEMPO/PROB covering that time. These do not change the main forecast; they show possible deterioration. Plan for the worst case.

Common mistakes

TAFs are obtained from aviationweather.gov and cached for up to 5 minutes. Small aerodromes may not issue TAFs. This is for training purposes only; the official meteorological briefing takes precedence in flight.

How is the TAF read?

  1. Find the validity. The GGSS/GGSS group that follows the issue time gives the start and end day/hour of the forecast.
  2. Read the main forecast. Wind, visibility, weather phenomena and cloud; same coding as METAR.
  3. Apply the FM groups. From the FM time onwards, the entirely new forecast is valid.
  4. Mark the BECMG periods. Within the period, both the old and new values are possible; after the period, the new value is definitive.
  5. Treat TEMPO and PROB as the worst-case scenario. If it covers your planned time and is below minimums, plan an alternate.

Frequently asked questions

What is a TAF, and how does it differ from a METAR?

METAR is the current observation of an aerodrome, issued roughly every 30–60 minutes. TAF is a 9–30 hour forecast for the same aerodrome and describes changes with the FM, BECMG, TEMPO and PROB groups.

What does FM mean in a TAF?

FM (from) indicates that a completely new forecast begins from the stated day, hour and minute. All previous values are invalid after FM.

What is the difference between BECMG and TEMPO?

BECMG is a change that begins at any point within the period and becomes permanent. TEMPO refers to temporary fluctuations; once the period ends, the main forecast applies again.

What do PROB30 and PROB40 mean?

Shows the conditions occurring with a 30% or 40% probability. Probabilities of 50% and above are not given with PROB but directly with TEMPO/BECMG.

How to read the TAF validity period?

For example, 2712/2818: from the 27th at 12:00 UTC to the 28th at 18:00 UTC. The first two digits are the day, and the next two are the hour.

Are the times in the TAF Turkish time?

No, all times are UTC. Add 3 hours for Turkish time.

Does every aerodrome issue a TAF?

No. TAFs are generally issued at aerodromes with scheduled traffic and a meteorological office; at small aerodromes there may be only a METAR.

Are my results being saved?

The coach is open to everyone. To see your quiz results and the question type you confuse most, simply sign up for free and log in.

Sources

More calculators