VREF

Reference landing speed

PPLATPL Aircraft General Knowledge
IN SHORT

VREF is the minimum airspeed at which the aircraft can land safely in a specific landing configuration (flaps and landing gear extended), as defined in the AFM.

What is VREF?

VREF is the airspeed, specified by the aircraft manufacturer in the Aircraft Flight Manual (AFM) or Pilot's Operating Handbook (POH), that is used as a reference during landing. This speed is defined for the full landing configuration (flaps fully extended, landing gear down) and is generally related to VS0 (stalling speed with flaps fully extended).

VREF is a fundamental parameter in landing performance calculations. The pilot determines the approach speed by adding a wind correction to VREF, depending on wind conditions and runway condition. For example, if there is a 10 knot crosswind, an approach speed of VREF + 5 knots is selected. Landing distance may vary depending on factors such as weight, runway elevation and temperature, and is calculated from the tables in the AFM.

Flying below VREF increases the risk of stall; flying above it lengthens the landing distance. Correct selection and application of VREF is critical for a safe and efficient landing.

Example

In the AFM: VREF = 130 knots (MTOW, sea level, standard temperature). If the wind is a 15 knot headwind, approach speed = 130 + 5 = 135 knots. If the weight drops to 80% MTOW, the new VREF is read from the AFM table as 125 knots.
TEST YOURSELF

An aircraft's AFM gives VREF = 140 knots at MTOW. How does VREF change when the aircraft's weight falls to 75% MTOW?

How it is asked in the ATPL exam: 3 questions

Think about your answer, then reveal it.

1. In accordance with JAR 25, the landing reference speed VREF must include a safety margin of _____ above the reference stall speed in landing configuration.

  1. 15%
  2. 10%
  3. 23%
  4. 20%
Show answer

Correct answer: 23%

VREF = 1.23 × VSRO means a 23% margin above stall speed is required to ensure the aircraft remains controllable and has adequate safety during approach and landing.

2. According to JAR-25, what minimum safety margin must the reference landing speed (VREF) maintain above the reference stalling speed in landing configuration (VSRO)?

  1. 15%
  2. 20%
  3. 23%
  4. 10%
Show answer

Correct answer: 23%

VREF is defined as 1.23 times VSRO, which provides a 23% safety margin to ensure adequate control authority and protection against stall during the landing phase.

3. An aircraft crosses the runway threshold at a speed greater than VREF during landing. What effect does this have on the landing distance required?

  1. the aeroplane needs longer distance to stop.
  2. the aeroplane can not stop.
  3. the aeroplane needs shorter distance to stop.
  4. the aeroplane stops at same distance.
Show answer

Correct answer: the aeroplane needs longer distance to stop.

Landing distance increases with speed because the aircraft has more kinetic energy to dissipate. Higher touchdown speed means longer braking distance is needed.

Solve 10 free questions from this subject →

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]