VFE

Maximum Flap Extended Speed

PPL Flight Instruments
IN SHORT

VFE is the maximum speed that must not be exceeded with flaps extended; it is the upper end of the white arc on the airspeed indicator.

What is VFE?

With flaps extended, the loads on the wing and the forces on the flap mechanism are high. Above VFE the flap structure may be damaged.

Some aircraft have different VFE values for different flap settings. In that case the white arc on the indicator shows the full-flap VFE, and the others are written in the aircraft flight manual and on the cockpit placard.

TEST YOURSELF

Which speed is shown by the upper end of the white arc?

How it is asked in the PPL exam: 2 questions

Think about your answer, then reveal it.

1. What speed is indicated by the term 'VFE' in the aircraft flight manual?

  1. Threshold speed
  2. Best rate of climb speed
  3. Maneuvering speed
  4. Flap extension speed
Show answer

Correct answer: Flap extension speed

VFE is the maximum flap extension speed—the airspeed limit above which flaps must not be lowered or extended.

2. Why is the maximum speed with flaps extended (VFE) lower than the normal cruising speed?

  1. At speeds higher than VFE, the aerodynamic forces would overload the flap and wing structures.
  2. Flaps will stall if they are deployed at too high an airspeed.
  3. Too much drag is induced.
  4. Flaps are used only when preparing to land.
Show answer

Correct answer: At speeds higher than VFE, the aerodynamic forces would overload the flap and wing structures.

At speeds above VFE, the aerodynamic loads on the flaps and wing structure would exceed their design limits and cause structural failure.

Solve 10 free questions from this subject →

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]