Pushback

PPLATPLIR Communications
IN SHORT

Pushback is the process of moving an aircraft backwards away from its gate or parking position. It is a procedure coordinated between ATC and ground crew before departure.

What is Pushback?

Pushback is the process of moving the aircraft backwards from the terminal gate or parking position by a tow tractor or push-back tug, until it is in a position from which it can move under its own engines. The aircraft cannot run its engines during this process, and the pilot and ground crew coordinate by radio. The pilot must obtain a "pushback clearance" from ATC or ground control before pushback begins. During the operation the pilot monitors the pushback through the rear camera or with marshallers. As a critical stage of aerodrome operations, pushback creates collision risks if it is not managed properly.

On the radio

GROUND 'Turkish 123, pushback approved, wind 180 degrees 8 knots.'
PILOT 'Pushback approved, Turkish 123. Engines cross-bleed off, flight controls free.'
GROUND 'Turkish 123, commence pushback.'
PILOT 'Commencing pushback, Turkish 123.'
TEST YOURSELF

When can the pilot start the engines during pushback?

Frequently asked questions about Pushback

What is a pushback tractor?

Special vehicles called tow tractors or push-back tugs, used to pull the aircraft back from the terminal gate. They are operated under pilot control and directed by the operator via radio communication.

Can the pilot start the engines during pushback?

No. The aircraft's engines remain off during the pushback process. The engines are only started by the pilot after the aircraft has reached its movement position.

What is pushback clearance?

The permission obtained by the pilot from ATC or ground control to begin the pushback process. Pushback is not started without this clearance.

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]