Initial Contact

PPLATPLIR Communications
IN SHORT

Initial Contact is the first radio call made by a pilot to an ATC unit, containing standard information such as aircraft identification, current altitude and intentions.

What is Initial Contact?

Initial Contact is the first radio call made by a pilot to the frequency of an ATC unit such as Approach, Tower, Ground or Centre. The call contains the aircraft identification (tail number), current altitude, position, intentions (approach, preparing for departure, etc.) and any special circumstances (emergency, medical emergency, etc.).

Making the initial contact correctly allows ATC to identify the aircraft quickly, locate it on the radar display and provide the appropriate air traffic control service. The pilot should speak briefly, clearly and professionally and should not give unnecessary information. The pilot should comply with ATC readback requests and confirm that the instructions given have been correctly understood.

Initial Contact is made in VFR and IFR flights, when entering controlled airspace, at the start of an approach and when transferring to other ATC units. Applying the correct procedure increases the effectiveness of air traffic management and ensures safety.

On the radio

PILOT Istanbul Approach, TC-ABC, Cessna 172, Flight Level 35, 15 miles south of Ataturk, requesting descent to 2000 feet for approach.
APPROACH TC-ABC, Istanbul Approach, radar contact, descend to 2000 feet, QNH 1013.
TEST YOURSELF

A pilot is about to make initial contact with Istanbul Approach. Which of the following is the correct Initial Contact procedure?

Frequently asked questions about Initial Contact

What information does the pilot give in an Initial Contact call?

An Initial Contact call includes the aircraft identification (tail number), current altitude, position and intentions. Special circumstances such as an emergency are also stated if present.

When is Initial Contact made?

Initial Contact is made when entering controlled airspace, at the start of an approach and when transferring to another ATC unit. It applies to both VFR and IFR flights.

How should the pilot speak during Initial Contact?

The pilot should speak briefly, clearly and professionally and should not give unnecessary information. The pilot should comply with ATC readback requests and confirm that the instructions have been correctly understood.

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 19 Nov 2026 · Report an error: [email protected]