Initial Approach Segment

Turkish: INITIAL

PPLATPLIR Communications
IN SHORT

The Initial Approach Segment is the part of an instrument approach procedure between the Initial Approach Fix (IAF) and the Intermediate Fix (IF).

What is Initial Approach Segment?

The Initial Approach Segment (INITIAL) is the first stage of an instrument approach procedure and lies between the Initial Approach Fix (IAF) and the Intermediate Fix (IF). This segment begins when the pilot is cleared by ATC onto the approach procedure and continues until the intermediate approach segment is joined.

In this segment the pilot reaches the IAF at the specified altitude and on the specified track, then prepares for landing in accordance with the requirements of the procedure. Speed reduction, flap selection and configuration changes are carried out at this stage. In radio communication, ATC issues instructions such as "Cleared for Initial Approach" or "Proceed to Initial Approach Fix".

The initial approach segment is a critical part of the instrument approach procedure because the pilot receives air traffic control instructions, confirms the procedure and completes the preparations needed for landing during this phase. Procedure design includes specific altitude and speed restrictions throughout this segment.

On the radio

ATC 'Turkish 42, cleared for initial approach runway 09 left, descend and maintain 2000 feet'
PILOT 'Cleared for initial approach runway 09 left, descend maintain 2000, Turkish 42'
Below: 15 NM from the IAF, descent from 3000 feet to 2000 feet begins and speed is reduced to 180 knots at the start of the procedure.
TEST YOURSELF

In an instrument approach procedure, between which two points does the Initial Approach Segment (İlk Yaklaşma Segmenti) lie?

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]