OBS

Omni Bearing Selector

PPLIR Radio Navigation
IN SHORT

The OBS is the knob on a VOR indicator used to select the desired track (radial) to be followed; the CDI needle and TO/FROM indication respond to this selection.

What is OBS?

The pilot selects a track with the OBS; the instrument shows the aircraft's position relative to that track. To find position, the OBS is turned until the needle is centred: if FROM is shown, the selected value is the radial the aircraft is on; if TO is shown, the radial is the reciprocal of the selected value.

Correct use: select the track to be flown (close to the heading). For an inbound track, select the reciprocal of the radial and read TO; for an outbound track, select the radial itself and read FROM, which prevents reverse sensing.

TEST YOURSELF

The OBS is set to 250, the needle is centred and TO is indicated. Which radial is the aircraft on?

Frequently asked questions about OBS

How is the VOR radial read using the OBS?

Turn the OBS to centre the needle. If FROM is indicated, the selected value is the radial the aircraft is on; if TO is indicated, the radial is the reciprocal of the selected value.

How is the OBS set for inbound and outbound tracks?

For an inbound track, select the reciprocal of the radial and read TO; for an outbound track, select the radial itself and read FROM. This method prevents reverse sensing.

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 16 Nov 2026 · Report an error: [email protected]