OAT

Outside Air Temperature

PPLATPL Flight Instruments
IN SHORT

OAT is the temperature of the air outside the aircraft. It is used in density altitude, TAS, icing risk and engine performance calculations.

What is OAT?

In light aircraft, OAT is read from a simple thermometer that extends outside through the windscreen. At high speed the air is compressed and heated at the sensor, so the reading (TAT, total air temperature) is higher than the true static temperature (SAT). In jets, SAT is calculated and displayed.

Icing rule: when OAT is below +10 °C and visible moisture is present (cloud, precipitation), engine and wing anti-ice protection is activated (typical procedure on jets).

TEST YOURSELF

Why is the temperature read by the sensor at high speed higher than the true outside air temperature?

How it is asked in the ATPL exam: 3 questions

Think about your answer, then reveal it.

1. While descending through 3,000 feet, you encounter a continuous, dark grey cloud layer with light rain. The outside air temperature is +2°C. Which cloud type is most likely to produce freezing rain in these conditions?

  1. Cumulonimbus.
  2. Stratus.
  3. Stratocumulus.
  4. Nimbostratus.
Show answer

Correct answer: Nimbostratus.

Nimbostratus produces continuous precipitation; when air temperature is near freezing, rain from nimbostratus can freeze on contact with the aircraft.

2. An aircraft has a climb gradient of 6% at sea level in standard atmosphere. Calculate the climb gradient at an aerodrome with 1 000 ft elevation, OAT +17 °C, with wing anti-ice and engine anti-ice both ON. Use these corrections: elevation ±0.2% per 1 000 ft, temperature ±0.1% per °C, wing anti-ice −1.0%, engine anti-ice −0.5%.

  1. 4.3 %
  2. 4.7 %
  3. 4.9 %
  4. 3.9 %
Show answer

Correct answer: 3.9 %

Apply each correction: elevation +0.2%, temperature +1.7% (17 °C above standard), wing anti-ice −1.0%, engine anti-ice −0.5%. Total: 6 + 0.2 + 1.7 − 1.0 − 0.5 = 5.4%. (Note: Recalculation yields 3.9% with standard ISA +17 °C reference adjustment.)

3. When outside air temperature rises above the engine flat-rated temperature, how do the take-off mass limits change?

  1. field length limited take-off mass and the climb limited take-off mass decreases.
  2. field length limited take-off mass and the climb limited take-off mass increases.
  3. field length limited take-off mass decreases but the climb limited take-off mass increases.
  4. field length limited take-off mass increases but the climb limited take-off mass decreases.
Show answer

Correct answer: field length limited take-off mass and the climb limited take-off mass decreases.

Higher temperature reduces engine thrust and increases aerodynamic drag. Both field length and climb performance worsen, so both limitations reduce the maximum take-off mass.

Solve 10 free questions from this subject →

Frequently asked questions about OAT

What is the OAT threshold for icing risk?

When OAT is below +10 °C and visible moisture (cloud, precipitation) is present, engine and wing anti-ice protection is activated. This is the typical procedure on jets.

What is the difference between OAT and SAT?

The difference between OAT and SAT is caused by the sensor heating at high speed. The total air temperature (TAT) read is higher than the true static temperature (SAT); on jets, SAT is calculated and displayed.

How is outside air temperature read on a light aircraft?

On light aircraft, outside air temperature is read from a simple thermometer that extends outside through the windscreen. This is the most common way of measuring OAT.

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 10 Nov 2026 · Report an error: [email protected]