Ground Risk Buffer
Ground Risk Buffer (GRB)
Turkish: Yer Risk Tamponu
The Ground Risk Buffer is an additional safety distance left outside the impact area of an unmanned aircraft in SORA, to protect people on the ground.
What is Ground Risk Buffer?
The Ground Risk Buffer (GRB) is a concept used in the Specific Operations Risk Assessment (SORA) method developed by JARUS. In the event of a loss of control, engine failure or emergency landing of a UAS (unmanned aircraft system), the area where the aircraft will fall is not limited to the defined impact area; due to wind, drift and flight dynamics, it may reach slightly beyond this area. The ground risk buffer is the safety distance left around the impact area to cover this possible deviation and to reduce the risk to people outside the impact area.
The size of the buffer is determined by values such as the characteristic dimension and speed of the UAS and the population density of the area where the operation takes place. In densely populated areas a wider buffer is required. The detailed calculation method is given in the SORA document and in EASA's AMC/GM texts that adopt this method, and approval from the relevant authority is required for each operation. In Türkiye, the criteria to be applied are determined according to the UAS regulations and authorisation correspondence of SHGM (the Turkish DGCA); current values should be checked in the relevant publications.
For the pilot, the ground risk buffer directly affects operational planning. When selecting the flight area, it should be checked whether the buffer enters areas where people are present, and if necessary the flight route, altitude or operational limits should be changed accordingly. If the buffer is not sufficient, the risk level of the operation increases and additional measures (for example a parachute system or choosing an area of lower population density) may be required.
In SORA, what is the ground risk buffer left to protect?
The ground risk buffer is the additional safety distance left outside the UAS impact area to cover deviations caused by wind and drift and to protect people on the ground.
Frequently asked questions about Ground Risk Buffer
What is the difference between the ground risk buffer and the impact area?
The ground risk buffer is the additional safety distance left outside the impact area. The impact area is the region where the UAS is expected to fall, while the buffer covers the surroundings of this region against drift and deviation.
How is the size of the ground risk buffer determined?
The buffer size is determined by the SORA method according to the characteristic dimension and speed of the UAS and the population density of the operating area. Current criteria should be checked in the EASA AMC/GM texts and SHGM regulations.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 4 Nov 2026 · Report an error: [email protected]