RPAS

Remotely Piloted Aircraft System

UAS Unmanned Aircraft (Drones)
IN SHORT

RPAS is the complete system of an unmanned aircraft and all its supporting systems, flown by a pilot from a remote ground control station.

What is RPAS?

RPAS (Remotely Piloted Aircraft System) is an official term defined by EASA and ICAO. The system consists of three main components: the remotely piloted aircraft (RPA), the ground control station (GCS) and the data link between them. The pilot controls the aircraft from the ground control station, receives telemetry data and manages the flight.

Unlike common terms such as "drone" or "İHA" (unmanned aerial vehicle), RPAS is the official aviation term used in international regulations such as EASA Part-107 (Operational Rules), Part-149 (RPAS Pilot Certification) and ICAO Annex 2. In Turkey, this definition is also the basis of the UAS Operations Regulation published by SHGM (the Turkish Directorate General of Civil Aviation).

RPAS carries different certification and authorisation requirements depending on its weight, the type of operation and the airspace. Commercial operations, specialised operations and open category operations are regulated according to the RPAS classification. Persons seeking RPAS pilot certification must fully understand the RPAS concept and the relevant legislation.

Example

In the EASA Part-149 certification syllabus: 'The RPAS pilot must monitor all control parameters of the aircraft from the ground control station and must be able to intervene immediately when necessary.' In the SHGM UAS Operations Regulation: 'RPAS operations may require ATC approval depending on the airspace classification and operation category.'
TEST YOURSELF

Which of the following is NOT included in RPAS (Remotely Piloted Aircraft System)?

Frequently asked questions about RPAS

What is the difference between RPAS and a drone?

Unlike common terms such as drone or İHA, RPAS is the official aviation term used in EASA and ICAO regulations. The system consists of the aircraft, the ground control station and the data link.

What components make up an RPAS?

An RPAS consists of the remotely piloted aircraft (RPA), the ground control station (GCS) and the data link between them. The pilot controls the aircraft from the ground control station and monitors telemetry data.

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 16 Nov 2026 · Report an error: [email protected]