Fix
A fix is the precise geographical position of the aircraft determined by using navigation aids (such as VOR, NDB or GPS). It is used to check navigation accuracy and to identify critical points along the route.
What is Fix?
A fix is the precise geographical position of an aircraft at a given moment, determined by the pilot or by an automatic navigation system. It is obtained using VOR radials, NDB range lines, GPS coordinates, radar detection, or a combination of these aids. In navigation planning and approach procedures, fixes are defined as specific points along the route and are used to check that the aircraft is on track.
Fixes are linked to the waypoints (WPT) specified in the flight plan. When the pilot reaches a planned fix during navigation, they compare the actual position with the planned position to calculate drift (deviation) and make the necessary corrections. In approach procedures, critical fixes such as the Initial Approach Fix (IAF), Intermediate Approach Fix (IF), Final Approach Fix (FAF) and Missed Approach Point (MAP) provide guidance from the start to the end of the procedure.
In modern aircraft, the FMS (Flight Management System) and GPS detect fixes automatically and monitor navigation accuracy in real time. In conventional navigation, the pilot determines fixes manually using VOR/DME, NDB/ADF or visual references. Accurate fix determination is critically important for safe flight, particularly in poor weather conditions and in areas of heavy traffic.
Example
Approach example: In an ILS approach, the OUTER MARKER (OM) is designated as the IAF (Initial Approach Fix), a point 5 NM out is the IF (Intermediate Approach Fix), and the MIDDLE MARKER (MM) is the FAF (Final Approach Fix). The pilot passes these fixes in sequence to complete the procedure.
During navigation, the pilot reaches a planned fix and notices that the actual position is 2 NM right of the planned position. What does the pilot measure this with?
At the fix, the pilot compares the actual position with the planned position to determine the deviation. This deviation may result from wind effects, and the pilot corrects the heading towards the next fix. Drift angle, on the other hand, is the change in the aircraft's track direction caused by wind.
Frequently asked questions about Fix
What is the difference between a fix and a waypoint?
A fix is the precise geographical position of the aircraft determined by navigation aids, while a waypoint (WPT) is a route point specified in the flight plan. Fixes are linked to waypoints, meaning that when a planned waypoint is reached, a fix is taken to check position.
What are the IAF, IF, FAF and MAP fixes used for in an approach procedure?
In an approach procedure, the IAF, IF, FAF and MAP are critical fixes that provide guidance to the aircraft from the start to the end of the procedure. These points are used to determine which stage of the approach the aircraft is in.
How is a fix determined in modern aircraft?
In modern aircraft, the FMS (Flight Management System) and GPS detect fixes automatically and monitor navigation accuracy in real time. In conventional navigation, the pilot determines the fix manually using VOR/DME, NDB/ADF or visual references.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 31 Oct 2026 · Report an error: [email protected]