Fix

Turkish: Fix Noktası

PPLATPLIR General Navigation
IN SHORT

A fix is a geographical position determined either by visual reference to a ground point or by the intersection of bearings or radials from one or more navigation aids. It is used for position reporting and in flight planning and procedures.

What is Fix?

A fix, in ICAO terminology, is a geographical position determined by visual observation of a reference point on the ground, or by the intersection of bearings (radials) taken from one or more navigation aids. A fix may be the point where a VOR radial crosses another radial or a DME distance, or it may be a village, hill or junction lying in a given direction from an NDB. The pilot describes the route over these points and uses the same points when reporting position to ATC.

Fixes are used in two basic ways: as intermediate points along a route, and as defining points of procedures. In instrument approach procedures, points such as the IAF, IF and FAF are defined as fixes; holding procedures are also usually established over a fix. In RNAV systems, fixes are stored in the database as waypoints with known coordinates, and the FMS builds the route between these points. For this reason, knowledge of fixes is of direct operational importance in a non-ILS approach or when following a SID or STAR.

For the pilot, the concept of a fix is important for reducing navigation errors. If the aid (VOR, NDB, DME) and method (radial intersection or visual reference) used to define a fix are known, it becomes easier to confirm a position and to notice track deviation. Fix coordinates are published in the national AIP and in the relevant navigation databases; naming and usage details can vary by country and airspace, so the current AIP should be the reference for up-to-date information.

TEST YOURSELF

According to ICAO terminology, how is a fix determined?

Frequently asked questions about Fix

How is a fix point determined?

A fix point is determined by visual reference or by the intersection of bearings taken from one or more navigation aids. For example, the point where two VOR radials cross may be a fix.

What is a holding fix?

A holding fix is the fix point on which a holding procedure is established. The pilot reaches this point, which the holding pattern uses as its reference, to start the holding procedure.

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]