DVOR
Doppler VHF Omnidirectional Range (Doppler VOR)
DVOR (Doppler VOR) is a type of VOR that produces the VOR radial information using the Doppler principle and is more resistant to multipath reflections than CVOR.
What is DVOR?
DVOR stands for Doppler VOR and is the Doppler-principle type of the VHF Omnidirectional Range (VOR) system. ICAO standards (Annex 10, Volume I) define the VOR operating band as 108.00 - 117.95 MHz; DVOR is a system in the same frequency band that provides the same radial (magnetic bearing) information. The difference lies in how the radial information is produced: elements in a circular antenna array are switched electronically in sequence to simulate the Doppler shift created by a rotating antenna. The resulting phase difference is converted into a radial angle in the pilot's equipment.
The main advantage of DVOR is its resistance to multipath propagation and ground reflections. Because the conventional CVOR uses a rotating directional antenna system, reflections from nearby buildings, hangars, metal structures and terrain can cause radial errors. The circular array and large ground plane of DVOR reduce the effect of these reflections, so it provides a more stable radial information. For error-free operation, the siting and maintenance of the system must comply with criteria set by ICAO and national authorities.
From the pilot's point of view, the difference between DVOR and CVOR is usually not noticeable in use; the system presents the same radial information on the same equipment (VOR indicator / HSI). However, the more stable output of DVOR increases reliability in navigation and approach procedures, especially around aerodromes where there is a high risk of intense reflections. Whether a VOR station is DVOR or CVOR and its service status are published in the state's AIP; pre-flight NOTAM and AIP checks must be carried out.
Often confused with
| Feature | CVOR (Conventional VOR) | DVOR (Doppler VOR) |
|---|---|---|
| Radial generation | Rotating directional antenna (mechanical/electrical rotation) | Electronic switching of a circular antenna array (Doppler simulation) |
| Multipath reflection sensitivity | Higher; reflections can cause radial errors | Lower; more resistant to reflections |
| Operating band | 108.00 - 117.95 MHz (ICAO Annex 10) | 108.00 - 117.95 MHz (ICAO Annex 10) |
What is the main advantage of DVOR over CVOR?
DVOR reduces the effect of ground reflections on the radial information thanks to its circular antenna array and Doppler principle. Its operating band is the same as CVOR (108.00 - 117.95 MHz).
Frequently asked questions about DVOR
What is the difference between DVOR and CVOR?
DVOR (Doppler VOR) produces radial information by Doppler simulation using a circular antenna array, whereas CVOR uses a rotating directional antenna. For this reason DVOR is more resistant to multipath reflections, and both operate in the 108.00 - 117.95 MHz band.
How does DVOR work?
DVOR simulates the Doppler shift by electronically switching the elements of a circular antenna array in sequence. The resulting phase difference is converted into a radial angle in the equipment.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 20 Nov 2026 · Report an error: [email protected]