Espace aérien de classe E
Turc : Hava Sahası Sınıfı E
Airspace Class E is controlled airspace in which both IFR and VFR flights are permitted and ATC service is provided.
Qu'est-ce que l'espace aérien de classe E ?
Class E airspace is a category of controlled airspace defined by ICAO Annex 11 and SERA (Single European Sky Air Traffic Management Regulation). Both IFR and VFR flights are permitted in this class; however, all flights are informed by ATC and receive traffic advice. Visibility and cloud clearance minima apply to VFR flights (typically 5 km visibility and 1000 ft vertical separation). IFR flights are under full ATC control.
Class E airspace is usually located outside control zones (CTR), but around aerodromes or along specific corridors. The airspace classification and boundaries published in the Turkish AIP must be checked by the pilot. Pilots flying in this class must remain in communication with ATC and comply with the instructions given.
Class E airspace is important for VFR pilots because they may fly under VFR conditions here, but using ATC service is mandatory. Transition levels and transition altitudes are defined within Class E airspace; the pilot uses QNH below these levels and QNE (FL) above them.
À la radio
Souvent confondu avec
| Classe | Vol IFR | Vol VFR | Service ATC |
|---|---|---|---|
| D (CTR) | Obligatoire | Conditional (permission required) | Obligatoire |
| E | Autorisé | Autorisé | Mandatory (information service) |
| G (non contrôlé) | Interdit | Autorisé | Aucun |
Which of the following is CORRECT for a pilot conducting a VFR flight in Airspace Class E?
VFR flights are permitted in Airspace Class E, but using ATC service is mandatory. The pilot must remain in communication with ATC and comply with the instructions given. The minimum visibility requirement is typically 5 km.
Frequently asked questions about Airspace Class E
What are the minima for VFR flights in Class E airspace?
Typically 5 km visibility and 1000 ft vertical separation apply. Exact values and limits are published in the AIP of the relevant country.
Is ATC service mandatory in Class E airspace?
For VFR pilots, using ATC service is mandatory in Class E. IFR flights are under full ATC control.
How are QNH and QNE used in Class E airspace?
Below the transition altitude the pilot uses QNH; above the transition level the pilot uses QNE (FL).
Traduit automatiquement (IA) à partir de notre Turkish glossary entry utilisant la terminologie OACI/EASA. Mis à jour le 20 nov. 2026 · Signaler une erreur : [email protected]