Step Down Fix
A Step Down Fix is a navigation fix defined on an instrument approach procedure at which the aircraft may descend to a lower minimum descent altitude. Each step down fix has its own new minimum altitude.
¿Qué es un Step Down Fix?
A Step Down Fix is a navigation fix used during an Instrument Approach Procedure (IAP), particularly on non-precision approaches and on some precision approaches. When the pilot reaches these fixes, the pilot may descend to a new minimum descent altitude (MDA) specified in the procedure.
Each step down fix has its own MDA value. When the first step down fix is reached, the aircraft may descend to the first MDA; when the next step down fix is reached, it may descend to a lower MDA. In this way, altitude is reduced step by step. Step down fixes are carefully designed to provide obstacle clearance margin.
Step down fixes may be defined by NDB, VOR, DME, GPS or visual references (for example a lake or a hill). On the approach plate, the relevant MDA is clearly written beside each step down fix. The pilot may not begin descending to that altitude before reaching the step down fix; permission to descend exists only once the fix has actually been reached.
Ejemplo
On a non-precision approach the approach plate shows: 'FAF MDA 1800 ft, Step Down Fix MDA 1200 ft'. At which point may the pilot begin descending to 1200 ft?
It is prohibited to start descending to that altitude before reaching the step down fix. The pilot may descend to the new MDA only when exactly over the step down fix.
Frequently asked questions about Step Down Fix
When is a Step Down Fix used?
A Step Down Fix is a navigation fix used on an approach procedure to reduce altitude step by step at specific points. It is seen particularly on non-precision approaches and on some precision approaches.
When is descent clearance given at a Step Down Fix?
The pilot may not begin descending to the new MDA before reaching the Step Down Fix. Descent permission is valid once the fix has been reached exactly, and the new MDA is written beside the fix on the approach plate.
Where is the Step Down Fix MDA value found?
Each Step Down Fix has its own MDA value, clearly written beside the fix on the approach plate. During the approach, the first MDA is used at the first fix and a lower MDA at the next fix.
Traducido automáticamente (IA) desde nuestro Turkish glossary entry utilizando la terminología OACI/EASA. Actualizado el 19 nov 2026 · Notificar un error: [email protected]