Mountain Effect

Turco: Dağ Etkisi

PPLIR Radionavegación
IN SHORT

Mountain Effect is a direction-finding error caused by radio signals being reflected and refracted by high terrain, mainly affecting NDB/ADF bearings.

What is Mountain Effect?

Mountain Effect is a bearing error caused by high ground, ridges and slopes changing the propagation of radio waves. When the signal from an NDB (Non-Directional Beacon) station strikes mountain slopes, it is reflected and refracted, and the ADF (Automatic Direction Finder) receiver in the aircraft reads the signal as arriving from a direction different from its true bearing. As a result the ADF needle deviates from the true station direction and the pilot may obtain an incorrect heading information.

The effect is most noticeable in medium frequency (MF/LF) NDB systems, which interact more strongly with the terrain and ground conductivity. VOR and other VHF systems operate on the line of sight principle, so they are affected by a different kind of disturbance, appearing as signal loss and shadowing behind mountains. For this reason, ADF bearings and approaches over or near high terrain must be assessed with care.

The practical consequence for the pilot is as follows: if the ADF needle deflects suddenly and unexplainably when flying close to a mountain slope, or if the signal is weak or the reading is inconsistent with the previous position, the indication may be erroneous. The size of the error depends on the station and the terrain shape; numerical values and usage limits are published in the AIP of the relevant country. ADF readings should be cross-checked with other navigation aids such as VOR, GNSS or radar.

TEST YOURSELF

What is the name of the ADF direction error caused by reflection and refraction of an NDB signal in mountainous terrain?

Frequently asked questions about Mountain Effect

What is the difference between mountain effect in ADF and signal disturbance in VOR?

Mountain Effect is a phenomenon in which reflection and refraction of the signal cause a bearing error in NDB/ADF. In VHF systems such as VOR the disturbance usually appears as signal loss and shadowing, so the two situations must be treated separately.

How does mountain effect affect the ADF needle?

Because the signal is reflected and refracted, Mountain Effect can deflect the ADF needle away from the true station direction. The deflection is especially noticed when flying close to a mountain slope and when the signal is weak; ADF readings should be compared with other navigation aids.

Traducido automáticamente (IA) desde nuestro Turkish glossary entry utilizando la terminología OACI/EASA. Actualizado el 20 nov 2026 · Notificar un error: [email protected]