Wingtip Vortex

Turkish: Kanat Ucu Girdabı

PPLATPL Principles of Flight
IN SHORT

A wingtip vortex is a rotating airflow that forms at each wingtip, caused by the pressure difference between the upper and lower wing surfaces, and trails behind the wing.

What is Wingtip Vortex?

A wingtip vortex is a rotating airflow formed when high-pressure air from the underside of the wing flows around the wingtip to the low-pressure area on the upper surface. The lift produced along the wing ends at the wingtip, so the pressure difference is cut off at the tip and the air curls around the tip because of this difference. As a result, a pair of vortices forms, one from each wingtip, trailing spirally behind the aircraft. Viewed from behind, the left wingtip vortex rotates clockwise and the right wingtip vortex rotates anticlockwise.

These vortices create downwash behind the wing. The lift force is tilted slightly rearwards by the effect of the downwash, and this component produces induced drag. In other words, the physical source of induced drag is the wingtip vortices; as lift is produced, this drag is inevitably produced as well. For wings with a high aspect ratio, the vortex effect for the same lift is smaller, so induced drag is also lower.

Vortices remain behind the aircraft as wake turbulence for some time and gradually dissipate. ICAO classifies aircraft into light, medium and heavy categories according to maximum take-off mass: the heavy category covers aircraft of 136 000 kg and above, and the light category covers aircraft of 7 000 kg and below. ATC separation minima and application procedures are published in the AIP and in the relevant ATC procedures. Practical precautions for pilots are: taking off before the point where a heavy aircraft rotated, and climbing above its flight path; avoiding crossing below the flight path of a heavy aircraft during approach and landing; and taking wind conditions into account.

Often confused with

Wingtip VortexInduced DragWake Turbulence
A rotating airflow formed by the pressure difference at the wingtip during lift generationA drag component produced by the rearward tilt of the lift forceThe turbulent region behind the aircraft formed jointly by vortices and downwash
Source: wingtipSource: lift generation and downwashSource: vortices and downwash
TEST YOURSELF

Why does a wingtip vortex form?

Frequently asked questions about Wingtip Vortex

What is the difference between a wingtip vortex and wake turbulence?

A wingtip vortex is a rotating airflow produced by the pressure difference at the wingtip; wake turbulence is the turbulent region behind the aircraft formed jointly by the vortices and downwash. The vortex is the strongest component of wake turbulence.

Why does a wingtip vortex cause drag?

A wingtip vortex creates downwash behind the wing and tilts the lift vector rearwards, which causes induced drag. For this reason, vortex energy is the extra power the wing expends while producing lift.

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]