VX
VX is the airspeed that gives the greatest gain of height over horizontal distance; it is used to clear obstacles after a short-field take-off.
What is VX?
At VX the aeroplane gains the most height per mile travelled; its angle of climb is the steepest. On take-offs that require obstacle clearance, the aeroplane is climbed at VX until the obstacle has been cleared, and then VY is adopted. VX is lower than VY and is closer to the stall speed, so the reaction time available in the event of an engine failure is shorter.
As altitude increases, VX (as IAS) increases slightly and VY decreases slightly; the two speeds converge at the absolute ceiling of the aeroplane.
After take-off there is an obstacle ahead. Which speed is used until the obstacle has been cleared?
VX gives the greatest gain of height per unit of distance.
How it is asked in the ATPL exam: 2 questions
Think about your answer, then reveal it.
1. During a positive climb, which statement about best angle of climb speed (VX) and best rate of climb speed (VY) is correct?
- VX is always above VY.
- VX may be greater or less than VY depending on altitude
- VY is always above VMO.
- VX is always below VY.
Show answer
Correct answer: VX is always below VY.
VX (best angle of climb) is always slower than VY (best rate of climb). VX maximizes altitude gain per distance; VY maximizes altitude gain per time. The speed for maximum angle is always lower.
2. For a piston engine aeroplane at constant weight, the best angle of climb speed (Vx) occurs when:
- the drag is maximum.
- the weight is minimum.
- the excess thrust is maximum.
- the excess power is maximum.
Show answer
Correct answer: the excess thrust is maximum.
Vx is the speed at which the difference between available thrust and required drag is greatest, maximizing excess thrust for the steepest climb angle.
Frequently asked questions about VX
What is the difference between VX and VY?
VX is lower than VY and is closer to the stall speed; therefore the pilot's reaction time in the event of an engine failure is shorter.
How does VX change as altitude increases?
As altitude increases, VX (as IAS) increases slightly and VY decreases slightly; the two speeds converge at the absolute ceiling of the aeroplane.
When do you change from VX to VY when clearing an obstacle?
On take-offs that require obstacle clearance, the aeroplane is climbed at VX until the obstacle has been cleared, and VY is adopted after the obstacle has been passed.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 18 Nov 2026 · Report an error: [email protected]