VMCL

Minimum Control Speed Landing

PPLATPL Aircraft General Knowledge
IN SHORT

VMCL is the minimum airspeed required to keep an aeroplane controllable during landing after one engine has failed.

What is VMCL?

VMCL is a critical speed limit defined for multi-engined aeroplanes and published in the AFM. If an engine fails, the pilot must not allow the speed to fall below VMCL in the landing configuration (flaps and landing gear extended) in order to maintain control of the aeroplane.

VMCL is lower than VMCA (minimum control speed during take-off) because the landing configuration (extended flaps, extended landing gear) produces more drag, which improves controllability.

VMCL depends on the design and weight characteristics of the aeroplane and is stated in the Performance section of the AFM. During the approach and landing phases in particular, the pilot should take care not to let the speed fall below this value. If the speed falls below VMCL, there is a risk of loss of control on the side of the failed engine and the aeroplane may roll towards that side.

This speed limit is a fundamental part of a safe landing procedure and is an important topic in pilot training, especially for single-engine failure scenarios.

Example

The AFM of a twin-engined aeroplane states a VMCL of 45 knots. If the pilot experiences an engine failure during the approach to land, with the landing gear and flaps extended, they must maintain at least 45 knots airspeed. Falling below this speed may lead to loss of control.

Often confused with

SpeedConfigurationPhaseDefinition
VMCAClean (flaps 0°, landing gear up)Take-offLimit of controllability in the event of an engine failure
VMCLLanding (flaps extended, landing gear extended)LandingLimit of controllability in the event of an engine failure
TEST YOURSELF

The AFM of a twin-engined aeroplane states a VMCL of 48 knots and a VMCA of 65 knots. If the left engine fails during the approach to land, which speed must the pilot not fall below?

Frequently asked questions about VMCL

What is the difference between VMCL and VMCA?

VMCL is the minimum speed needed to maintain control after an engine failure in the landing configuration (flaps and landing gear extended); VMCA is the minimum control speed during take-off. VMCL is lower than VMCA because the landing configuration produces more drag.

What happens if the speed falls below VMCL during landing?

If the speed falls below VMCL, there is a risk of loss of control on the side of the failed engine and the aeroplane may roll towards that side. The VMCL value is stated in the Performance section of the AFM.

Where is the VMCL value found?

The VMCL value is published in the Performance section of the aeroplane's AFM and varies with the design and weight characteristics of the aeroplane.

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 13 Nov 2026 · Report an error: [email protected]