TOC

Top of Climb

PPLATPL Flight Planning
IN SHORT

TOC (Top of Climb) is the point at which an aircraft completes its climb phase and moves into the cruise phase. It fixes the starting point for fuel and time calculations in flight planning.

What is TOC?

TOC is the point where the aircraft reaches the planned cruise altitude from its initial altitude and the climb phase ends. From this point, the aircraft levels off and flies in cruise at the cruise altitude, to the extent that weight and performance allow. On the flight plan, the TOC point is usually defined by a coordinate on the route or by a waypoint along the route.

For the pilot, the main importance of TOC is calculating the difference in fuel and time between climb and cruise correctly. During the climb the engine burns more fuel and the rate of progress over the ground is lower than in cruise. For this reason, the climb time and the distance covered during the climb are calculated separately, and the remaining route is assessed using cruise performance data. Correct positioning of TOC is necessary for the arrival fuel and the planned arrival time to be accurate.

In practice, TOC is calculated using performance tables, taking into account the aircraft's take-off weight, temperature, pressure altitude and wind components. Wind changes the groundspeed during the climb and therefore changes the position of TOC along the route. When preparing the flight plan, climb and cruise fuel are written down separately, and the cruise portion after TOC is considered together with TOD, the point where descent begins. For country- and operator-specific procedures, refer to the relevant AIP and the operator's manual.

Example

Calculation example (for illustration only): If the aircraft climbs from a initial altitude of 0 ft to a cruise altitude of 8000 ft and the average climb rate is 700 ft/min, the climb time is approximately 8000 / 700 = 11.4 minutes. This time, together with the distance covered during the climb, determines the position of TOC along the route.

Often confused with

TermMeaningPosition in the Flight Phase
TOCPoint where the climb endsTransition between climb and cruise
TODPoint where descent beginsTransition between cruise and descent
TEST YOURSELF

What does the TOC (Top of Climb) point represent?

Frequently asked questions about TOC

What is the difference between TOC and TOD?

TOC (Top of Climb) is the point where the climb ends and the cruise phase begins. TOD (Top of Descent) is the point where descent begins. Both are planning points that separate the phases of a flight.

How is TOC calculated?

The time to TOC is approximately found by dividing the difference between the target altitude and the initial altitude by the average climb rate. The actual value varies with performance tables, weight, temperature and wind.

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]