Stall
A stall is the separation of airflow from the upper surface of a wing when it exceeds its critical angle of attack, causing lift to drop suddenly. The first step in recovery is to reduce the angle of attack.
What is Stall?
A stall is the sudden drop in aerodynamic lift that occurs when a wing exceeds its critical angle of attack, causing the aircraft to enter an uncontrolled descent.
All aircraft stall at the same critical angle of attack, typically 15-20°, but not at the same airspeed. The stall speed varies with weight, load factor, flap position and engine power.
For student pilots, a critical hazard is that at low altitude, in turns and in uncoordinated flight, a stall can develop into a spin.
Symptoms include a stall warning sound or light, reduced control effectiveness, buffet, and a nose or wing drop.
Recovery: reduce the angle of attack by lowering the nose, correct the wings carefully with aileron, apply full power, and once airspeed has increased, return smoothly to level flight.
Which is the first action in stall recovery?
A stall is the exceeding of the critical angle of attack; the angle of attack is reduced first.
How it is asked in the ATPL exam: 3 questions
Think about your answer, then reveal it.
1. In which situation is the stall warning system inhibited? Select all that apply: 1 – when flaps are fully retracted 2 – when the aircraft is on the ground 3 – when windshear is detected 4 – when a GPWS warning is active. Which statements are correct?
- 2, 3.
- 2.
- 1, 2.
- 2, 4.
Show answer
Correct answer: 2.
The stall warning is inhibited only when the aircraft is on the ground to prevent false alerts during taxi and takeoff roll. Flap position, windshear, and GPWS alerts do not inhibit the stall warning.
2. According to CS 25, what is the minimum safety margin that must exist between the stall speed and the stall warning activation speed on a large aeroplane?
- 5 kt or 5% of the CAS whichever is the greater.
- 5 kt or 5% of the CAS whichever is the lower.
- VS0 + 5kt.
- VS0 + 5%
Show answer
Correct answer: 5 kt or 5% of the CAS whichever is the greater.
Regulations require a margin of 5 knots or 5% of calibrated airspeed, whichever is greater. This ensures the crew has sufficient warning before the aircraft enters an aerodynamic stall.
3. At which loading condition will an aircraft have its highest stalling speed?
- low gross mass and forward centre of gravity
- high gross mass and aft centre of gravity
- low gross mass and aft centre of gravity
- high gross mass and forward centre of gravity
Show answer
Correct answer: high gross mass and forward centre of gravity
Stalling speed increases with gross mass. A forward CG also increases stalling speed because it requires a higher angle of attack to generate sufficient lift. High mass and forward CG together produce the highest stall speed.
Frequently asked questions about Stall
Why does stall speed vary with weight?
A heavier aircraft needs a higher angle of attack to generate the same lift, which increases the stall speed.
What is the difference between a stall and a spin?
A stall is the loss of lift by a wing; a spin is the autorotation of the aircraft about one wing during a stall. A spin is more dangerous.
Why is a stall more dangerous in a turn?
In a turn the load factor increases and the stall speed rises; the pilot may stall without realising it and the risk of a spin increases.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]