Squawk 7600
Squawk 7600 is the SSR code a pilot sets on the transponder to inform air traffic control, without using voice, that the aircraft's radio communication has failed.
What is Squawk 7600?
Squawk 7600 is the Mode A transponder code indicating that an aircraft's radio communication has been wholly or partially lost. When the pilot does not receive acknowledgement from the control unit by radio, the transponder is set to 7600. Air traffic control can then identify the aircraft on the radar display and knows that communication has been lost.
The code is defined in the ICAO standard (Annex 10, Volume IV); it has the same meaning under EASA, the FAA and in Turkey under SHGM (Turkish DGCA).
The practical importance of the code is that the pilot does not remain silent during a radio failure. When the transponder is set to 7600, the control unit becomes aware of the aircraft's presence and the loss of communication, and can plan appropriate traffic separation and alternative means of communication. However, 7600 on its own is not sufficient: the pilot must continue to apply the established Lost Communication Procedure (for example, continuing in accordance with the last received instructions, the pre-determined route and the expected approach time). The code should only be used if the transponder is able to transmit it.
Codes often confused are 7500 (unlawful interference) and 7700 (general emergency). 7600 is for radio communication failure only; if an emergency exists, 7700 is used. Where a country has a different practice, it is published in that country's AIP; in Turkey (SHGM), SERA and ICAO practice apply.
Often confused with
| Code | Meaning | Use |
|---|---|---|
| 7500 | Unlawful interference (hijack) | Unauthorised interference with or seizure of the aircraft |
| 7600 | Radio communication failure | Notifying via transponder when radio is not working |
| 7700 | General emergency | Fuel, technical or medical emergency |
What does transponder code 7600 indicate?
7600 is the standard SSR code used to indicate radio communication failure. A general emergency is indicated by 7700, and unlawful interference by 7500.
Frequently asked questions about Squawk 7600
What is the difference between Squawk 7600 and 7700?
Squawk 7600 indicates radio communication failure, while Squawk 7700 indicates a general emergency. Both codes are defined in the ICAO standard and have the same meaning under EASA, the FAA and SHGM.
How is the transponder set to 7600 during a radio failure?
A pilot whose radio is not working sets the transponder to 7600 to report the loss of communication to the control unit via radar. This code does not remove the obligation to apply the Lost Communication Procedure.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 6 Nov 2026 · Report an error: [email protected]