SQUAWK
SQUAWK is the four-digit numerical transponder code assigned to a pilot by ATC and set on the transponder. It is used to identify the aircraft on the radar screen.
What is SQUAWK?
SQUAWK is a four-digit transponder code (0000-7777) assigned by air traffic control (ATC) to each aircraft. On ATC's instruction, the pilot sets this code on the transponder and reports it as "squawking".
The transponder transmits the code with radar signals. It is displayed on the ATC radar next to the aircraft's position, allowing the controller to track many aircraft at the same time.
Standard emergency codes exist: 7700 (emergency), 7600 (radio failure), 7500 (unlawful interference/hijack). For normal flights a unique code is assigned.
Transponders operate in Mode A (code), Mode C (code plus altitude) and Mode S (code plus altitude plus identification); Mode S is standard on modern aircraft. The SQUAWK code is a critical part of ATC communication on both IFR and VFR flights.
On the radio
ATC instructs you "Squawk 3421". How do you acknowledge this?
The correct readback must include the aircraft callsign and the code set. "Squawking 3421, [Aircraft Callsign]" is the standard and professional response.
How it is asked in the ATPL exam: 3 questions
Think about your answer, then reveal it.
1. You must set transponder code 7700 when your aircraft is:
- Enter the UK FIR.
- Are being hi-jacked.
- Are in an emergency condition.
- Suffer communications failure.
Show answer
Correct answer: Are in an emergency condition.
Code 7700 is the emergency code used by any aircraft in distress or in any emergency condition. Codes 7600 and 7500 are used for specific situations (radio failure and unlawful interference respectively).
2. When you select transponder code 7700, you are telling air traffic control that:
- Have an emergency.
- Have a radio failure.
- Are not receiving a radar service.
- Are in controlled airspace.
Show answer
Correct answer: Have an emergency.
Code 7700 is the universal emergency squawk that immediately alerts radar controllers that an aircraft is in an emergency situation requiring urgent assistance.
3. When must an aircraft set the transponder code to 7700?
- When passing the transition level
- In distress
- When following a SID
- When flying within controlled airspace
Show answer
Correct answer: In distress
Squawk 7700 indicates distress to all radar facilities. This code alerts ATC and other aircraft that the aircraft is in a life-threatening emergency requiring immediate assistance.
Frequently asked questions about SQUAWK
How is the SQUAWK code set?
The pilot sets the four-digit code given by ATC on the transponder control panel and reports it as "Squawking [code]". Once the code is set, the aircraft's identity is established on the ATC radar.
What do the codes 7700, 7600 and 7500 mean?
7700 means emergency, 7600 means radio failure and 7500 means hijack. In an emergency, the pilot may set these codes without first informing ATC.
What is the difference between SQUAWK and Mode A/C/S?
Mode A transmits only the code. Mode C adds altitude information to the code. Mode S adds altitude and aircraft identification to the code; it is standard on modern aircraft.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]