OCH
Obstacle Clearance Height
OCH is the minimum height above the runway threshold, at the final approach point (MAPt), that allows the aircraft to clear obstacles safely during an approach procedure.
What is OCH?
OCH (Obstacle Clearance Height) is a critical parameter used in precision approach procedures (ILS, LPV, etc.). It is calculated in metres by adding a 35 feet safety margin to the highest obstacle in the approach area, and is shown on the Approach Plate as OCA/OCH. If the pilot cannot obtain visual reference before reaching this height, the pilot must carry out the missed approach procedure. OCH values may differ for different aircraft categories (CAT A, B, C, D) and are used as the MDA/DA.
Example
Pilot: "Approach, Cessna 172, 3 miles final, reached OCH 300 feet, searched for visual reference but could not find it, executing missed approach."
Controller: "Cessna 172, roger, missed approach clearance, climb to 2000 feet, turn left heading 180."
On an ILS approach, the Approach Plate shows "OCA/OCH 280 ft / 85 m". At what height must the pilot carry out a missed approach if no visual reference is found?
OCA and OCH express the same height; one is written in feet (280 ft) and the other in metres (85 m). The pilot may use either, depending on the altimeter scale in use. In the exam, remember that the two are equivalent.
Frequently asked questions about OCH
What is the difference between OCH and OCA?
OCA is the same height expressed in feet, while OCH is expressed in metres. On the Approach Plate it is shown as OCA/OCH 250 ft / 76 m.
What should the pilot do when OCH is reached?
If the pilot cannot obtain visual reference at this height, they must immediately start the missed approach procedure and carry out a go-around.
What obstacles is OCH based on?
It is calculated by adding a 35 feet margin to the highest obstacle within the obstacle clearance area defined in the approach procedure design.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]