MCA
Minimum Crossing Altitude
MCA (Minimum Crossing Altitude) is the minimum altitude an aircraft must maintain when crossing a specific fix or waypoint. The aircraft may not cross this point below the MCA value.
What is MCA?
MCA (Minimum Crossing Altitude) is the lowest altitude an aircraft must reach when crossing a specific fix, waypoint or navaid on a flight procedure. On the chart it is written next to the fix, for example 'MCA 5000', and it generally means 'at or above' (at this altitude or higher). The aircraft may not cross this point below the MCA value; crossing higher is permitted.
MCA is mostly used in SIDs (Standard Instrument Departures) and STARs (Standard Arrival Routes) and in approach procedures. Its purpose is to ensure a safe transition into the next segment of the procedure and to leave suitable obstacle clearance during departure or approach. It can also appear as a restriction at points where ATC manages traffic flow. The procedure and fix to which the restriction applies are specified on the relevant chart and in the AIP publication.
For the pilot, MCA must be considered in flight planning and in the initial climb or descent profile. When planning the descent, the altitudes of MCA-restricted fixes must be included in the TOD calculation; otherwise there is a risk of infringing the restriction. MCA must not be confused with MEA or MORA: MEA is a value that provides obstacle clearance and navaid signal coverage along a segment, while MORA is the minimum altitude used for obstacle avoidance within a grid. Exact values and application rules vary by state and by published procedure, so current AIP and chart information must always be followed.
Example
Often confused with
| MCA | MEA | MORA |
|---|---|---|
| Crossing a specific fix/waypoint | Along the segment | Within the geographic grid (off-route) |
| Minimum limit at the crossing point | Obstacle clearance and navaid signal | Obstacle clearance within the grid |
| Written next to the fix on the chart | Written on the airway segment | Written on the chart as a grid value |
When crossing a fix annotated 'MCA 5000' on a SID, what is the minimum altitude the aircraft must maintain?
MCA is the lower altitude limit at the fix. The aircraft must cross at 5000 ft or above; crossing below 5000 ft is an infringement of the restriction.
Frequently asked questions about MCA
What is the difference between MCA and MEA?
MCA is the minimum altitude to be observed when crossing a specific fix; MEA is the lowest altitude that provides obstacle clearance and navaid signal along a route segment. MCA applies to a single point, while MEA applies to a segment.
How is an MCA restriction applied in the aircraft?
The pilot keeps the aircraft at or above the MCA value when crossing the restricted fix. Crossing the fix higher than the MCA is permitted, while crossing lower is an infringement of the restriction.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]