GBAS

Ground-Based Augmentation System

ATPLIR Radio Navigation (IR)
IN SHORT

GBAS (Ground-Based Augmentation System) is a ground-based augmentation system that improves GNSS signals with corrections from a ground station, enabling precision approaches.

What is GBAS?

GBAS (Ground-Based Augmentation System) is an augmentation system that increases the accuracy and integrity of GNSS (satellite-based navigation) signals through a ground station located near the aerodrome, enabling precision approaches. The system consists of a ground infrastructure made up of fixed reference receivers at known positions, together with the GNSS receiver and approved flight software on board the aircraft. The ground station calculates errors in satellite measurements (errors caused by orbit, clock and atmosphere) and generates correction data.

The corrections are transmitted to the aircraft via VHF Data Broadcast (VDB). The data also includes Final Approach Segment (FAS) information defining the approach path, so that the path to be followed by the pilot and autopilot is defined on the ground. ICAO refers to this application as GLS (GNSS Landing System). GBAS is designed as an alternative to ILS, whose localizer and glide slope antennas require ground-based guidance equipment.

Importance for pilots: GBAS provides precision approach capability at aerodromes where ILS cannot be installed or is costly, and a single ground station can support several runway ends. The scope of application varies by state and authority; the most common application is CAT I operations, while standardisation and approval work for CAT II/III is ongoing. Which runway and with which minima a GBAS approach may be flown is determined by the AIP and the operator's operations manual.

Often confused with

ILSGBAS (GLS)SBAS (LPV)
Localizer and glide slope antennas on the groundReference receivers on the ground and VDB broadcastSatellite augmentation, no additional antenna needed at the aerodrome
VHF/UHF guidance signalGNSS correction and FAS dataGNSS correction, wide-area coverage
Depends on fixed ground equipmentOne station serves several runway endsOne system for a wide region
TEST YOURSELF

Through which channel does GBAS transmit correction data and approach path information to the aircraft for precision approach?

Frequently asked questions about GBAS

What is the difference between GBAS and ILS?

GBAS improves GNSS signals with corrections from a reference station on the ground to provide precision approaches. ILS produces a guidance signal using localizer and glide slope antennas on the ground; GBAS does not require these antennas.

Which approach categories does GBAS support?

GBAS is commonly used for CAT I precision approaches. Standardisation and approval work for CAT II/III is ongoing, and implementation depends on approval by the competent authority.

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 3 Nov 2026 · Report an error: [email protected]