DF
Direction Finder
DF (Direction Finder) is a system that allows a ground station to determine the bearing of an aircraft from its radio transmissions; it is also known as VDF.
What is DF?
DF (Direction Finding) is a system in which a ground station provides navigation assistance by determining the direction of a radio signal sent by a pilot. When a pilot contacts a DF-equipped station and transmits for a set period, the station measures the direction from which the signal arrives and provides the pilot with QDM (the magnetic heading the pilot should fly to reach the station), QDR (the magnetic bearing from the station, i.e. the direction of departure from the station), QTE (true bearing) or QUJ (magnetic bearing).
DF accuracy is classified into classes: Class A ±2°, Class B ±5°, Class C ±10°.
Especially in emergencies, and in aircraft whose navigation equipment has failed, requesting QDM for a lost pilot remains a valid and effective method of assistance.
A DF station gives "QDM 270, class B". What is the accuracy?
Class B is ±5°.
How it is asked in the ATPL exam: 3 questions
Think about your answer, then reveal it.
1. What is the minimum airborne equipment needed to use a VHF direction finder for navigation?
- VHF transmitter-receiver operating in the 118 MHz to 136 MHz range.
- VHF receiver operating in the 118 MHz to 136 MHz range.
- VHF compass operating in the 200 kHz to 1750 kHz range.
- cathode-ray tube.
Show answer
Correct answer: VHF transmitter-receiver operating in the 118 MHz to 136 MHz range.
A VHF direction finder requires a transmitter-receiver to both receive signals and transmit position reports to ground stations. A receiver alone cannot provide two-way communication needed for this navigation aid.
2. What is the minimum airborne equipment required to use a VHF direction finder (VDF) service?
- VHF receiver operating in the 118 MHz to 136 MHz range.
- cathode-ray tube.
- VHF compass operating in the 200 kHz to 1750 kHz range.
- VHF transmitter-receiver operating in the 118 MHz to 136 MHz range.
Show answer
Correct answer: VHF transmitter-receiver operating in the 118 MHz to 136 MHz range.
A VHF transmitter-receiver in the 118–136 MHz band is needed so the pilot can transmit to the VDF station while the station determines the bearing. A receiver alone is insufficient because the station must hear the aircraft transmission.
3. Which components are part of an Automatic Direction Finder (ADF) system installed in an aircraft?
- 1,2,4 and 5.
- 1,2,3 and 4.
- 2,3,4 and 5.
- all of the above.
Show answer
Correct answer: 1,2,4 and 5.
The ADF system comprises airborne equipment only: a receiver unit, a cockpit display (RMI or similar), a loop antenna (directional), and a sense antenna (omnidirectional). The NDB itself is ground-based equipment, not part of the airborne ADF system.
Frequently asked questions about DF
What is the difference between QDM and QDR in DF?
QDM is the magnetic heading the pilot should fly to reach the station; QDR is the direction of departure from the station. They differ by 180°.
What does the DF classification mean?
Classes A, B and C indicate DF accuracy. Class A gives the most accurate result (±2°), and Class C the least accurate (±10°).
How effective is DF in emergencies?
When navigation equipment has failed, DF remains a reliable method of assistance for lost pilots and is actively used by ATC.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]