Class Identifier

Turkish: Sınıf Etiketi (Class Identifier)

UAS Unmanned Aircraft Systems (Drones)
IN SHORT

The Class Identifier is the C0–C6 mark that a manufacturer assigns to a drone under EASA rules. It shows the drone's weight and performance class and determines which open category flights the drone may be used for.

What is Class Identifier?

The Class Identifier is the C0, C1, C2, C3, C4, C5 or C6 mark that a drone manufacturer places on the product in the European Union (EASA), assigning the device to a class under Delegated Regulation (EU) 2019/945. The mark gives standard information about the drone's weight and its safety features (speed, protection against errors, camera and similar). The pilot and operator can tell from this label which open category subcategory the drone may be flown in.

In the EASA system, open category subcategories are matched with C classes. Classes C0 and C1 are used in subcategory A1, class C2 in subcategory A2, and classes C3 and C4 in subcategory A3. This match also determines how far the flight must be kept from people. Weight limits are as follows: under 250 g for C0, under 900 g for C1, under 4 kg for C2, and under 25 kg for C3. Class C4 is defined for devices that do not carry a manufacturer's mark, in particular model aircraft and self-built devices. Scope and limits for the C5 and C6 marks are set out in current legislation; check the details with EASA and the regulation in force.

In Türkiye, SHGM applies the drone regulations in line with the EU framework, so C class logic is also a valid reference for Turkish pilots. For public institutions and flight planning, current practice is determined by the regulations published by SHGM (the Turkish DGCA). In the United States (FAA, 14 CFR Part 107), the C class label is not used; rules are defined separately by weight and flight category. For this reason, when flying in different countries, remember that the label is specific to each country.

Often confused with

Class IdentifierWeight LimitOpen Category Subcategory
C0under 250 gA1
C1under 900 gA1
C2under 4 kgA2
C3under 25 kgA3
C4No manufacturer's mark (model aircraft / self-built)A3
TEST YOURSELF

What is the weight limit for a drone carrying the C0 class identifier under EASA?

Frequently asked questions about Class Identifier

What is the difference between the EASA C class and FAA Part 107?

In EASA, the manufacturer gives the drone a C0–C6 class mark, and this mark determines the open category subcategory. FAA Part 107 has no C class; rules are defined by weight and flight category.

Where can a drone with the C2 class identifier fly?

A C2 mark shows that the drone may fly in subcategory A2 of the EASA open category. For restrictions on the flight area and local rules, consult SHGM in Türkiye and the relevant AIP publications.

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 4 Nov 2026 · Report an error: [email protected]