Chart Scale

Turkish: Harita Ölçeği

PPLATPL Navigation
IN SHORT

Chart scale is the ratio of a distance on the chart to the corresponding true distance on the ground. For example, at a scale of 1:500,000, 1 cm on the chart represents 5 km on the ground.

What is Chart Scale?

Chart scale is the ratio of a distance on the chart to the corresponding true distance on the ground. It is usually written as a representative fraction, such as 1:500,000. The numerator gives the unit on the chart, and the denominator gives its equivalent on the ground in the same unit. As the denominator decreases, the scale increases: a 1:500,000 chart shows more detail but covers a smaller area than a 1:1,000,000 chart.

Navigation charts used in aviation (ICAO aeronautical charts and VFR charts) are published at different scales depending on the chart type. Chart standards are defined in ICAO Annex 4 (Aeronautical Charts) and related documents, and the scale used is printed on the chart. A pilot cannot correctly interpret distances on a chart without knowing its scale. In addition, because of the map projection, the scale may not be the same everywhere on the chart; over long distances, the latitude scale and the scale bar printed on the margin are taken into account.

When measuring distance, the length measured on the chart with a ruler is multiplied by the scale denominator to convert it to a ground distance, and then units are converted. Since distances in aviation are given in nautical miles (NM), the conversion from km to NM is based on 1 NM = 1852 m. This value is used for route length, time and fuel calculations and in NavLog preparation.

Example

Assume a distance of 4 cm is measured on the route on a 1:500,000 chart.
4 cm x 500,000 = 2,000,000 cm = 20 km
20 km / 1.852 = approximately 10.8 NM
TEST YOURSELF

On a 1:500,000 chart, approximately how many km is a measured distance of 4 cm on the ground?

How it is asked in the ATPL exam: 2 questions

Think about your answer, then reveal it.

1. On a navigation chart, a straight line between two points measures 4.63 cm and represents a ground distance of 150 NM. What is the chart scale?

  1. 1: 3 000 000
  2. 1: 1 000 000
  3. 1: 5 000 000
  4. 1: 6 000 000
Show answer

Correct answer: 1: 6 000 000

Chart scale is calculated as: scale = chart distance ÷ ground distance. Converting 150 NM to cm (150 × 185,200 = 27,780,000 cm) and dividing by 4.63 cm gives approximately 1:6,000,000.

2. The distance between two points measured on a navigation chart is 42 mm. The chart scale is 1:1,600,000. What is the actual ground distance between these points?

  1. 36.30 NM
  2. 67.20 NM
  3. 370.00 NM
  4. 3.69 NM
Show answer

Correct answer: 36.30 NM

Ground distance = chart distance × scale denominator. 42 mm × 1,600,000 = 67,200,000 mm = 67,200 cm. Converting to nautical miles (÷ 185,200) gives approximately 36.30 NM.

Solve 10 free questions from this subject →

Frequently asked questions about Chart Scale

What is the difference between a large-scale chart and a small-scale chart?

Chart scale becomes larger as the denominator value decreases. A 1:500,000 chart is more detailed but covers a smaller area than a 1:1,000,000 chart.

How is distance measured on a chart?

The length measured on the chart with a ruler is multiplied by the chart scale denominator, and then converted to nautical miles. For example, at a scale of 1:500,000, 4 cm is approximately 10.8 NM.

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]