ASD
Accelerate-Stop Distance Required
ASD (Accelerate-Stop Distance Required) is the total distance required for an aeroplane to accelerate during take-off and then stop safely if the take-off is rejected.
What is ASD?
ASD is the abbreviation of Accelerate-Stop Distance Required, known in Turkish as "hızlanma-durma mesafesi". If a critical problem occurs during take-off, such as a critical engine failure or a serious warning, the pilot rejects the take-off. ASD is the total distance needed for the aeroplane to accelerate up to the V1 decision speed and then come to a complete stop by braking.
This distance depends on variables such as take-off weight, temperature, pressure altitude, wind component, runway slope and runway surface condition. Values are taken from the performance data prepared by the manufacturer and from the Aeroplane Flight Manual (AFM). The calculation method is defined in airworthiness standards such as CS-25. In practice, the exact values are found in the AFM and in the operator's approved performance source.
For the pilot, the importance is this: before a take-off decision is made, it must be ensured that the ASD value does not exceed the ASDA value available on the runway. This comparison is one of the basic conditions of take-off safety. The V1 speed and pre-take-off checks are part of the operational planning determined according to these performance data.
Often confused with
| Feature | ASD (Required) | ASDA (Available) |
|---|---|---|
| Meaning | The total distance the aeroplane needs to reject the take-off | The stop distance actually usable on the runway (and on the stopway, if any) |
| Determined by | Aeroplane performance data and AFM | Physical length of the runway and the defined stopway |
| Rule | ASD must not exceed ASDA | ASDA must be sufficient for ASD |
Which term expresses the total distance an aeroplane needs to accelerate and stop in a rejected take-off scenario?
ASD (Accelerate-Stop Distance Required) is the total stopping distance needed in a rejected take-off. ASDA is the distance available on the runway.
Frequently asked questions about ASD
What is the difference between ASD and ASDA?
ASD (Accelerate-Stop Distance Required) is the distance the aeroplane needs to accelerate and stop if the take-off is rejected; ASDA is the corresponding distance available on the runway. For the take-off to be considered safe, the ASD value must not exceed the ASDA value.
When does ASD become critical during take-off?
ASD is calculated for the rejected take-off scenario when a critical failure or warning occurs during take-off, before the V1 decision speed. Hot air, high altitude and heavy take-off weight increase this distance.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]