VMIN
Mindestgeschwindigkeit
VMIN is the lowest airspeed at which an aircraft can fly safely in a given configuration (flap setting, weight, altitude).
Was ist VMIN?
VMIN is the minimum airspeed, set above the stall speed (VS0 or VS1) and including an operational safety margin. It is determined so that the aircraft keeps its controllability, adequate performance and structural integrity.
The VMIN value depends on the aircraft configuration. In the landing configuration (flaps extended, landing gear down) it is called VMIN,0, while other configurations may have different VMIN values. The pilot must ensure that the aircraft does not fall below this speed during approach and landing.
VMIN is defined in the AFM (Aircraft Flight Manual) or POH (Pilot's Operating Handbook) and may vary with factors such as aircraft weight, centre of gravity position and altitude. During operational procedures, the pilot must leave an adequate margin above VMIN and recognise the loss of speed before the stall warning.
Über Funk
Wird oft verwechselt mit
| Begriff | Definition | Einsatzbereich |
|---|---|---|
| VMIN | Operational minimum speed (with stall margin) | Anflug, Landung, Normalflug |
| VS0 | Aerodynamische Strömungsabrissgeschwindigkeit (Landekonfiguration) | Indicates the stall limit |
| VFE | Maximalgeschwindigkeit für das Ausfahren der Klappen | Höchstgeschwindigkeit bei ausgefahrenen Klappen |
In the landing configuration of an aircraft, VS0 = 38 knots and VMIN,0 = 42 knots. Which speed should the pilot work to maintain during approach?
VMIN,0 is the operational minimum speed and is higher than the stall speed (VS0). During approach the pilot should work to maintain VMIN,0 or a higher speed. Falling below VS0 creates a stall risk, while falling below VMIN removes the operational safety margin.
Frequently asked questions about VMIN
What is the difference between VMIN and stall speed?
VMIN is the minimum airspeed, set above the stall speed (VS0 or VS1) and including an operational safety margin. It is not the stall speed itself, and the pilot must not fall below this speed during approach.
On what does the VMIN value depend, and where is it found?
The VMIN value depends on the aircraft configuration, weight, centre of gravity position and altitude. The values are defined in the aircraft's AFM (Aircraft Flight Manual) or POH (Pilot's Operating Handbook).
Maschinell übersetzt (KI) aus unserem Turkish glossary entry unter Verwendung der ICAO/EASA-Terminologie. Aktualisiert am 18. Nov 2026 · Fehler melden: [email protected]