Wind Triangle
Turkish: Rüzgâr Üçgeni
The wind triangle is the vector triangle formed by the true airspeed, wind and groundspeed vectors. It is used to find the wind correction angle, the compass heading and the groundspeed.
What is Wind Triangle?
The wind triangle is a vector diagram used to solve the track and groundspeed of an aircraft under the influence of wind. It consists of three vectors: the air velocity vector (in the direction the aircraft's nose points, with length equal to TAS), the wind vector (the direction the wind blows from, and its speed) and the ground velocity vector (in the direction of the actual ground track, with length equal to GS). The vector sum of air velocity and wind gives the groundspeed.
In the solution method, known values are separated from unknowns. If the desired track (TH), TAS and wind (direction and speed) are known, the wind correction angle (WCA) is found using the sine rule: sin WCA = (WS/TAS) x sin(WD - TH). The compass heading is HDG = TH + WCA (a positive WCA is a correction to the right), and the groundspeed is calculated as GS = TAS x cos WCA - WS x cos(WD - TH). These steps form the basis of the NavLog calculations in flight planning; the estimated time of arrival depends on these results.
The wind triangle is used both during planning and in flight (when the route changes or the wind changes). Because the wind varies in real flight, the solution gives an approximate result; the pilot corrects by monitoring GS and track deviation. The wind information used as input comes from upper wind forecasts and meteorological reports such as METAR and TAF. In the calculation, the direction the wind blows from must be used.
Example
What are the three vectors that make up the wind triangle?
The wind triangle is built from the sum of the air velocity vector (TAS, in the direction of HDG), the wind vector, and the ground velocity vector (GS, in the direction of TH).
Frequently asked questions about Wind Triangle
What is the difference between the wind triangle and the wind correction angle?
The wind triangle is the triangle drawn by the air velocity, wind and ground velocity vectors; the wind correction angle (WCA) is one of the results obtained by solving this triangle. In other words, the triangle is the method and the angle is the output of the calculation.
How is the wind triangle solved?
The wind triangle is solved when the TAS, the desired track (TH) and the direction and speed of the wind are known. The wind correction angle is found using the sine rule; the compass heading is obtained by adding TH and WCA, and the groundspeed is calculated from the TAS and wind components.
When is the wind triangle used?
The wind triangle is used in flight planning when it is required to calculate the compass heading needed to maintain the track and the estimated groundspeed. When the wind changes during flight, the heading and GS are recalculated using the same method.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]