Visual Scanning
Turkish: Görsel Tarama
Visual scanning is the technique by which the pilot moves their eyes in a regular sequence between the outside environment and the flight instruments, continuously monitoring the aircraft's status and surrounding traffic.
What is Visual Scanning?
Visual scanning is the technique by which the pilot moves their eyes in a regular and deliberate sequence between the outside environment, the flight instruments and other visual sources during flight. The aim is to obtain continuous and up-to-date information on the aircraft's attitude, position and surrounding traffic. Fixing the eye on a single point for a long time may cause the pilot to miss other important information.
Scanning is based on the eye moving between sources with short, frequent glances. Searching the outside view for traffic and obstacles, and checking basic parameters such as altitude, airspeed, heading and climb or descent rate on the instruments, are parts of this cycle. With each glance the eye focuses briefly to take in the information and then moves to the next point, allowing peripheral vision and memory to work together. The pilot adjusts the scanning frequency according to the phase of flight and the density of the environment; scanning is carried out more frequently in busy phases such as take-off, approach and landing.
Visual scanning is the basic application of attention management in the Human Performance subject. Attention is a limited resource in the cockpit and the pilot cannot process all information at every moment; scanning therefore helps plan which information attention is directed to and when. When scanning is not carried out, conditions such as Distraction, Loss of Attention Focus or Cognitive Fixation may arise. Scanning also plays a central role in maintaining Situational Awareness and forms the basis of instrument scanning in IFR flight. In VFR flight it is used to support the visual detection of traffic; however, scanning alone is not sufficient and must be supported by the pilot's own assessment and ATC information.
Often confused with
| Feature | Visual Scanning | Cognitive Fixation |
|---|---|---|
| What is done | The eye is directed at several sources at regular intervals | Attention remains locked on a single indication |
| Situational awareness | Maintained | Impaired |
| Outcome | Critical information is obtained in time | Other important information may be missed |
Which is the most common error in visual scanning?
Looking at a single point for a long time is known as fixation and leads to other critical information being missed. Effective scanning is a regular cycle of short, frequent glances.
Frequently asked questions about Visual Scanning
What is the difference between visual scanning and fixation?
Visual scanning is the eye being directed at several sources at regular intervals; fixation is attention remaining locked on a single indication. Scanning maintains situational awareness, whereas fixation impairs it.
How is visual scanning carried out?
Visual scanning is carried out by continuously moving the eyes in a logical sequence between the outside environment and the flight instruments. The key is to use short glances for each source and to check critical information more frequently.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]