Static Margin
Turkish: Statik Marj
Static margin is the measure of longitudinal static stability, expressed as the percentage of the mean aerodynamic chord (MAC) by which the centre of gravity (CG) lies ahead of the neutral point.
What is Static Margin?
Static margin is the measure of longitudinal static stability, expressed as the percentage of the mean aerodynamic chord (MAC) by which the centre of gravity (CG) lies ahead of the neutral point. Formula: Static margin (%MAC) = (Xnp - Xcg) / MAC x 100. Here Xnp is the position of the neutral point and Xcg is the position of the centre of gravity, both measured from the same reference point. When the centre of gravity is ahead of the neutral point, the margin is positive and the aircraft tends to return to its original attitude after a nose-up or nose-down disturbance.
The margin decreases as the CG moves aft. If the centre of gravity moves aft of the neutral point, the margin becomes negative and the aircraft becomes longitudinally unstable; in this case continuous pilot intervention may be required. If the margin is very large, the aircraft is stable but its manoeuvrability is reduced and a high elevator force is needed to trim. For this reason, the permitted CG range and therefore the acceptable margin is defined in the aircraft manufacturer's POH/AFM.
On the certification side, longitudinal static stability requirements are found in FAA 14 CFR 23.173 and EASA CS-23.173; in Turkey, SHGM (the Turkish DGCA) follows the EASA line. In general practice, as the CG approaches the aft limit, pitch response becomes more sensitive and recovery capability decreases. Exact figures vary by type and configuration; the aircraft AFM/POH should be consulted.
Example
Often confused with
| Static Margin | CG Margin | Neutral Point |
|---|---|---|
| Xnp - Xcg, %MAC | Distance of the CG from the forward and aft limits | Position of the neutral point (%MAC or m) |
| Measure of longitudinal stability | Compliance with loading limits | Limit point of stability |
How is static margin (%MAC) calculated?
Static margin = (Xnp - Xcg) / MAC x 100. The numerator is the difference between the neutral point and the centre of gravity; if the margin is positive, the aircraft is longitudinally stable.
Frequently asked questions about Static Margin
What is the difference between static margin and CG margin?
Static margin shows the longitudinal stability distance between the centre of gravity and the neutral point. CG margin is the distance of the centre of gravity from the permitted forward and aft limits. One relates to stability, the other to the loading limit.
How does the aircraft behave as static margin increases?
As static margin increases, the aircraft becomes more stable longitudinally, but in general control effectiveness decreases and more force is needed for pitch control. For this reason, the manufacturer defines the permitted margin in the POH/AFM.
How is static margin calculated?
Static margin is calculated as a percentage of MAC using the formula (Xnp - Xcg) / MAC x 100. Xnp is the position of the neutral point and Xcg is the position of the centre of gravity, both measured from the same reference point.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 12 Nov 2026 · Report an error: [email protected]