Operational control

Turkish: Operasyonel Kontrol

PPLATPLIR Air Law
IN SHORT

Operational control is the authority to make and implement all decisions concerning the safe and orderly conduct of a flight. It is exercised under the responsibility of the PIC and is limited by air traffic control and operator instructions.

What is Operational control?

Operational control is the authority and responsibility for operational decisions taken during the planning, preparation and conduct of a flight, within the framework of ICAO Annex 2 and EASA Part-FCL. This control is exercised by the Pilot in Command (PIC) and is used to ensure that the aircraft is operated safely, orderly and efficiently.

Operational control is applied within the procedures, limits and instructions set by the operator. The PIC assesses operational factors such as wind, fuel, weight and balance, weather and runway condition, and decides whether to conduct the flight, which route to use, and when to land. However, these decisions must comply with vectors, altitude restrictions and traffic management instructions issued by air traffic control.

Operational control must not be confused with legal responsibility. The operator is responsible for the airworthiness, maintenance, personnel training and general compliance of the aircraft; the PIC is responsible for the day-to-day operational management of the flight. This distinction is critical in accident investigations and legal proceedings.

Example

Before departure, the PIC reviews the METAR and sees that the runway is wet and the crosswind component is 12 knots. Although the maximum crosswind limit in the AFM is 15 knots, the PIC may use operational control authority to decide 'Runway wet, crosswind 12 knots, maximum performance required but safe'. However, if ATC states 'Runway 09 closed, you will depart from Runway 27', the PIC is obliged to comply with this instruction; operational control does not override ATC instructions.
TEST YOURSELF

A PIC sees before departure that the maximum crosswind limit in the AFM is 15 knots. The runway is wet and the wind is 18 knots crosswind. The PIC refuses the take-off. Which authority is this decision based on?

Frequently asked questions about Operational control

Are operational control and legal responsibility the same thing?

No. Operational control is the PIC's authority for the day-to-day operational management of the flight, whereas the operator is responsible for the airworthiness status, maintenance and personnel training of the aircraft. This distinction is important in accident investigations.

Who exercises operational control?

Operational control is exercised by the Pilot in Command (PIC). The PIC assesses factors such as fuel, wind, weight and balance and weather to decide whether to conduct the flight.

Must the PIC comply with air traffic control instructions in operational decisions?

Yes. The PIC's operational decisions must comply with the vectors, altitude restrictions and traffic management instructions issued by air traffic control.

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 21 Nov 2026 · Report an error: [email protected]