FL
Flight Level
FL is an altitude indication read when the altimeter is set to the standard pressure of 1013.25 hPa, and is generally used above 10,000 feet.
What is FL?
Flight Level (FL) is the altitude indication obtained by setting the altimeter to the reference value of 1013.25 hPa (standard pressure). As in FL350, the last two zeros are dropped when writing it, so FL350 means 35,000 feet. FL100 represents 10,000 feet.
Flight levels are the standard altitude indications assigned by air traffic control, especially at high altitudes (generally above the Transition Level). This system ensures that all aircraft use the same reference point regardless of the variable atmospheric pressure conditions in different regions, and it reduces the risk of conflict.
When pilots reach the Transition Level, they change the altimeter from QNH to 1013.25 hPa. During descent, when they pass below the Transition Level, they switch back to QNH.
In RVSM (Reduced Vertical Separation Minima) operations, a vertical separation of 1,000 feet is used between FL290 and FL410.
On the radio
A pilot flying at FL250 notices that the altimeter is set to 1013.25 hPa. At the same time, QNH 1018 hPa is being broadcast for the area. Approximately how many feet is the pilot's actual altitude?
FL250 = 25,000 feet at standard pressure (1013.25 hPa). When the QNH is higher (1018 hPa), the actual altitude is lower. Each 1 hPa difference corresponds to approximately 30 feet; a 5 hPa difference ≈ 150 feet. Actual altitude ≈ 24,850 feet, and the nearest answer is 24,000 feet (simplified version of the exam question).
How it is asked in the PPL exam: 3 questions
Think about your answer, then reveal it.
1. Match each altimeter setting to its corresponding reading: 1. QFE 2. QNH 3. 1013 hPa A. Height B. Altitude C. Flight Level
- 1-A, 2-B, 3-C
- 1-A, 2-C, 3-B
- 1-B, 2-A, 3-C
- 1-C, 2-B, 3-A
Show answer
Correct answer: 1-A, 2-B, 3-C
QFE gives height (distance above aerodrome), QNH gives altitude (distance above mean sea level), and 1013 hPa gives flight level (standard pressure reference).
2. An aircraft is flying at FL 100 under ISA conditions with an indicated airspeed of 150 kt. Assuming no instrument or position errors, what is the true airspeed?
- 181 kt.
- 170 kt.
- 175 kt.
- 165 kt.
Show answer
Correct answer: 175 kt.
At FL 100 under ISA conditions (OAT approximately -5°C), TAS increases from IAS due to lower air density. The TAS is approximately 175 kt.
3. You are maintaining FL 80 with an IAS of 120 kt. The outside air temperature is +20°C. Calculate the true airspeed.
- 132 kt.
- 120 kt.
- 102 kt.
- 141 kt.
Show answer
Correct answer: 141 kt.
At FL 80 with OAT +20°C (warmer than ISA), the air density is lower than standard, causing TAS to be significantly higher than IAS at approximately 141 kt.
Frequently asked questions about FL
Are FL100 and 10,000 feet the same?
Yes. FL100 is the altitude indication read when the altimeter is set to 1013.25 hPa, and it represents 10,000 feet. Flight levels are written with the last two zeros dropped.
How does RVSM affect flight levels?
In RVSM operations, a vertical separation of 1,000 feet is used between FL290 and FL410. This determines the separation between aircraft using the same levels at high altitude.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 18 Nov 2026 · Report an error: [email protected]