FCST
Forecast
FCST is the abbreviation for "forecast" in aviation meteorology. It appears in TAF, TREND, aerodrome forecasts and SIGMET messages.
What is FCST?
Aviation forecast products: TAF (aerodrome forecast, 9 to 30 hours), TREND (2-hour landing forecast appended to the end of a METAR), GAMET/area forecast (low level), SIGWX charts and SIGMET/AIRMET warnings.
In a SIGMET, the term "FCST" indicates that the phenomenon is not observed but forecast; "OBS" indicates that it is observed.
Example
What does "FCST" mean in a SIGMET?
FCST = forecast.
How it is asked in the ATPL exam: 3 questions
Think about your answer, then reveal it.
1. An aircraft is flying on a true course of 040° with a true airspeed of 120 kt. A wind of 30 kt is forecast. From which direction will the wind produce the maximum drift angle?
- 115°
- 145°
- 120°
- 130°
Show answer
Correct answer: 130°
Maximum drift occurs when wind is perpendicular to the aircraft's track. For a track of 040°, the perpendicular directions are 130° and 310°; 130° is the answer given.
2. You plan a 200 NM flight. When calculating compass heading, you mistakenly used 2°E magnetic variation instead of the correct 2°W. The forecast wind is as expected. What will be your off-track distance at the destination?
- 0 NM
- 7 NM
- 21 NM
- 14 NM
Show answer
Correct answer: 14 NM
The 4° heading error (2°E instead of 2°W) causes a drift of approximately 14 NM over 200 NM (200 × sin(4°) ≈ 14 NM).
3. During your flight planning, you review the weather forecast and see that a thick, dark cloud layer is expected to extend from 2,000 feet to 6,000 feet. Which cloud type is most likely to span multiple altitude levels in this way?
- Altocumulus.
- Nimbostratus.
- Cirrus.
- Stratus.
Show answer
Correct answer: Nimbostratus.
Nimbostratus is a vertically developed cloud that extends through multiple altitude levels, unlike other cloud types which are confined to single levels.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]