Failsafe
Failsafe is a system that makes a UAV carry out a pre-programmed safe action, usually an automatic landing, when the signal link is lost, the battery reaches a critical level or a system fault occurs.
What is Failsafe?
Failsafe is an automatic protection mechanism that activates during autonomous UAV flight when the communication link is lost, battery energy falls to a critical level, GPS signal is lost or other system faults occur. Set in advance by the pilot, this system makes the UAV land in a controlled manner from a certain altitude, enter hover at a fixed point, or return to its last known position.
The UAV pilot defines failsafe parameters (descent rate, landing point, hover duration, etc.) through software before flight. In the event of a fault, the system applies these settings automatically and brings the UAV to a safe state without the pilot needing to intervene. This feature is especially critical when flying in urban areas, over crowded areas or in regions where the possibility of returning is limited.
Failsafe types vary according to the software and UAV model: Return to Home (RTH), Land in Place (landing at a fixed point), Hover, or return to a pre-determined alternative position. Under Turkish SHGM regulations and EASA Part-NCO, a failsafe system is mandatory for commercial UAV operations.
Example
The failsafe setting of your UAV is defined as: 'On signal loss, land at a fixed point at 30 metres'. During flight, while at 80 metres, the pilot loses control. What happens?
The failsafe setting automatically applies the pre-defined parameters. On signal loss the system descends to 30 metres and lands at a fixed point. This happens without pilot intervention.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]