FAC
Final Approach Course
The Final Approach Course (FAC) is the line an aircraft must track during the final segment of an instrument approach, usually published as a magnetic course. It is the main reference for aligning the aircraft.
What is FAC?
The Final Approach Course (FAC) is the line, usually published as a magnetic course, that an aircraft must track during the final approach segment of an instrument approach procedure. This line defines the path from the Final Approach Fix (FAF) to the runway threshold or to the point where the landing minima apply, and it is shown separately on the approach chart.
In precision approaches (ILS), the final approach course matches the centre line produced by the localizer (LOC) signal and corresponds to a magnetic course close to the runway direction. In non-precision approaches (VOR, NDB or RNAV), the course is derived from the radial, bearing or waypoint geometry defined in the procedure. The pilot follows this course on the CDI or HSI and tries to keep it centred by applying wind correction.
For the pilot, its importance lies in forming the basis for establishing correct alignment in the final part of the approach. Alignment with the course, intercept angle and planning course capture before the FAF are the first points checked in the approach briefing and in error analysis. Procedure design and publication format can vary from country to country, so details are published in the AIP.
Example
Which of the following is true about the Final Approach Course?
The final approach course is the magnetic course tracked during the final segment of an instrument approach. It is often close to the runway direction but is not always exactly the same, and it is not used in VFR.
Frequently asked questions about FAC
What is the difference between the final approach course and the runway direction?
The final approach course is the magnetic course published in the approach procedure and is close to the runway direction in most ILS approaches, but it is not always exactly the same. The pilot must align the aircraft with the published course.
How is the final approach course tracked on an ILS?
On an ILS, the final approach course is the centre line of the localizer signal, and the pilot follows it by keeping the CDI needle centred. Small corrections are made for the effect of wind.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 3 Nov 2026 · Report an error: [email protected]