CTAF

Common Traffic Advisory Frequency

PPL Communications
IN SHORT

CTAF is the common radio frequency on which pilots at uncontrolled or non-towered aerodromes broadcast their position and intentions to each other.

What is CTAF?

CTAF (Common Traffic Advisory Frequency) is the frequency used in the United States at uncontrolled aerodromes, where pilots communicate by self-announcing. It is not an ATC frequency; no one grants clearances. As they approach the runway, in the circuit and on the runway, pilots state where they are and what they intend to do: "Aerodrome traffic, TC-ABC, left downwind runway 27, full stop." The term originates in the United States. In Europe and Turkey, uncontrolled aerodromes use an AFIS frequency, an air-to-air frequency or a dedicated aerodrome announcement frequency; the frequency is published in the AIP. CTAF knowledge is important for PPL/ATPL candidates planning international operations.

Example

"Aerodrome traffic, TC-ABC, 5 miles south, 2000 ft, right base entry runway 09."
TEST YOURSELF

Who gives take-off clearance on the runway on CTAF?

Frequently asked questions about CTAF

What is the difference between CTAF and AFIS?

CTAF is a pilot-to-pilot communication frequency used at uncontrolled aerodromes in the United States. AFIS is the type of frequency used for a similar purpose in Europe and Turkey; at some aerodromes it may be operator-supported.

What must a pilot say on the CTAF frequency?

The pilot must state their position (downwind, base, final, runway), aircraft registration and intended action (approach, take-off, full stop). Example: "Aerodrome traffic, TC-XYZ, final runway 09, full stop."

Is CTAF used in Turkey?

No. In Turkey, uncontrolled aerodromes use an AFIS frequency or a dedicated aerodrome announcement frequency. CTAF knowledge is only required for US operations.

Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 1 Nov 2026 · Report an error: [email protected]