CORRECT
CORRECT is the radio response given by ATC to confirm that the readback from the pilot has been verified and accepted.
What is CORRECT?
CORRECT is the standard radio response used by ATC (Air Traffic Control) to confirm that information repeated by the pilot (readback) has been received and understood correctly. After a pilot receives a clearance, instruction or information and reads it back, the ATC operator listens to the readback and, if it is completely correct, replies CORRECT. This is a critical verification point in the communication chain.
The READBACK and CORRECT procedure is defined in ICAO Annex 10 and Doc 4444. If the readback given by the pilot contains an error, ATC does not say CORRECT; instead it corrects the error and repeats the correct information. This system prevents misunderstandings, especially for critical information such as clearance, heading, altitude and frequency. Radio communication may suffer from poor audio quality, noise or pilot inattention; the CORRECT procedure minimises these risks.
On the radio
The pilot read back 'request climb from FL150 to FL180' to ATC. What should the ATC operator reply?
CORRECT is only given if the readback is completely correct. If the pilot makes an error in the readback (for example reading back FL120 instead of FL150), ATC does not say CORRECT; it points out the error and repeats the correct information. ROGER and WILCO serve different purposes.
Frequently asked questions about CORRECT
What is the relationship between READBACK and CORRECT?
READBACK is the pilot repeating the clearance or instruction received; CORRECT is ATC's reply confirming that this repetition is correct. If there is an error in the readback, ATC does not say CORRECT but corrects the error and repeats the correct information.
Why is the CORRECT procedure important?
The CORRECT procedure is a verification point that prevents misunderstandings of critical information such as clearance, heading, altitude and frequency. It reduces these risks where audio quality is poor or radio communication is noisy.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 11 Nov 2026 · Report an error: [email protected]