Cloud base
Turkish: Bulut Tabanı
Cloud base is the height of the lowest surface of a cloud layer, measured above ground level (AGL) or above mean sea level (MSL). It is given in feet in METAR and pilot reports.
What is Cloud base?
Cloud base is the height of the lowest point of a cloud layer. In meteorology this height is usually measured above ground level (AGL) or above mean sea level (MSL); in aviation it is most often reported as AGL. For an aerodrome, the cloud base shows the lower limit of the cloud layers observed from the air and from the ground.
In METAR and SPECI reports, the cloud base is given as a three-digit code and is expressed in hundreds of feet. For example, BKN025 means the lower boundary of the lowest layer is 2500 ft AGL, and OVC040 means the overcast layer above it starts at 4000 ft. The amount of cloud cover is expressed in oktas: FEW (1-2 oktas), SCT (3-4 oktas), BKN (5-7 oktas) and OVC (8 oktas). The ICAO standard uses this coding in Annex 3 and in the METAR definitions; EASA, FAA and Turkish SHGM practice are also based on this notation.
For a pilot, the cloud base is a critical piece of information both for calculating the ceiling and for assessing whether VMC (Visual Meteorological Conditions) criteria are met. The ceiling is the height of the lowest layer reported as BKN, OVC or vertical visibility (VV) only; FEW and SCT layers are not counted as a ceiling. Therefore a cloud base is not always a ceiling. To determine whether VMC conditions are met, the pilot must check the vertical and horizontal cloud distance requirements for the cloud base and the aerodrome airspace class from the SERA.5001 table. These values vary with airspace class and altitude; any country-specific additional rules are published in the AIP of the relevant country.
Example
Often confused with
| Cloud Base | Ceiling |
|---|---|
| The height of the lower surface of a cloud layer | The lowest height of BKN, OVC or vertical visibility layers only |
| Applies to all layers including FEW, SCT, BKN and OVC | FEW and SCT layers are not considered |
| In ICAO and EASA it is given in METAR as a three-digit code (e.g. 025 = 2500 ft AGL) | In the USA (FAA) the definition appears in 14 CFR 1.1 and observing practice; in practice it is similar to the ICAO definition |
When a METAR shows BKN025 OVC040, what is the ceiling in feet AGL?
The ceiling is the lowest of the BKN, OVC or vertical visibility layers. BKN025 is the lowest BKN layer, starting at 2500 ft AGL, and it defines the ceiling.
Frequently asked questions about Cloud base
What is the difference between cloud base and ceiling?
Cloud base is the height of the lower surface of a cloud layer and applies to all layers including FEW, SCT, BKN and OVC. The ceiling is only the lowest of the BKN, OVC or vertical visibility layers; FEW and SCT layers are not counted as a ceiling.
How does cloud base affect VMC conditions?
For VMC conditions, the cloud base and the airspace class are considered together. The vertical and horizontal cloud distance requirements are specified in the SERA.5001 table; country-specific additional rules are published in the AIP of the relevant country.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 17 Nov 2026 · Report an error: [email protected]