Airspeed Types
Turkish: Hava Hızı Türleri
Airspeed types are the four speed parameters that measure an aircraft's speed relative to the air mass and to the ground: IAS, CAS, TAS and GS. Each is used for specific purposes in navigation, performance and safety calculations.
What is Airspeed Types?
An aircraft's speed is expressed in four different ways, depending on the measurement method and the reference point:
Indicated Airspeed (IAS) is the value shown directly by the airspeed indicator. It is calculated by measuring dynamic pressure through the pitot-static system. It includes instrument error, position error and compressibility effects. Stall speed, V-speeds and flap limits are defined in terms of IAS, so it is the most important speed parameter in pilot operations.
Calibrated Airspeed (CAS) is the value obtained by removing instrument error and position error from IAS. It reflects the aircraft's aerodynamic performance more accurately. CAS is used in performance calculations and in AFM data.
True Airspeed (TAS) is found by applying a density correction to CAS. It shows the aircraft's true speed relative to the air mass. TAS is required for navigation planning, fuel consumption calculation and wind correction. As altitude and temperature increase, TAS increases even though IAS remains constant.
Ground Speed (GS) is calculated by adding the wind vector to TAS. It is the aircraft's true speed relative to the ground. Flight time, arrival time and navigational accuracy are determined using GS. In a no-wind environment, TAS = GS.
Example
Often confused with
| Parameter | Measurement Method | Pilot Use | Navigation Use |
|---|---|---|---|
| IAS (Indicated Airspeed) | Pitot-static system (direct) | Stall, V-speeds, flap limits | Not used directly |
| CAS (Calibrated Airspeed) | IAS + instrument/position error | Performance calculations | In performance tables |
| TAS (True Airspeed) | CAS + density correction | Reference (altitude check) | Wind correction, fuel planning |
| GS (Ground Speed) | TAS + wind vector | Reference (relative to ground) | Flight time, arrival time |
At sea level an airspeed indicator reads 100 IAS. The same aircraft shows 100 IAS at 10,000 ft. Approximately how many knots is the TAS at altitude? (Assume standard atmosphere.)
At altitude, air density decreases, so the same IAS corresponds to a higher TAS. At 10,000 ft, TAS ≈ IAS × 1.2, so 100 × 1.2 ≈ 120 knots.
Frequently asked questions about Airspeed Types
What is the difference between IAS and CAS?
IAS is the value shown directly by the airspeed indicator. CAS is the calibrated airspeed obtained by removing instrument error and position error from IAS, and it reflects the aircraft's aerodynamic performance more accurately.
How is ground speed (GS) calculated?
Ground Speed (GS) is calculated by adding the wind vector to TAS, and it is the aircraft's true speed relative to the ground. In a no-wind environment, TAS = GS.
Machine-translated (AI) from our Turkish glossary entry using ICAO/EASA terminology. Updated 31 Oct 2026 · Report an error: [email protected]