Mohamed Boudiaf ATIS (DABC)

The current METAR of a Turkish airport is turned into a realistic ATIS broadcast and read aloud in English with a VHF radio effect. Listen, fill in your copy sheet and check it. Add bird strikes, thunderstorms, wind shear or an ILS failure to raise the difficulty; every sentence has a plain-English explanation.

PPLIRATPLRadioAudio
In short: What is ATIS?

ATIS (Automatic Terminal Information Service) is a looping radio broadcast that gives the weather, runway in use, approach type, transition level and essential information at an airport. Pilots copy it before first contact and quote its letter, e.g. “information Bravo”. ATIS wind is magnetic, unlike METAR wind which is true.

These broadcasts are generated for training and are not an official ATIS. Do not use them in flight. Read the disclaimer again

Mohamed Boudiaf International Airport (DABC / CZL) ATIS is generated for training from the airport's current METAR. Press ▶ Listen below to hear the arrival (ARR) or departure (DEP) ATIS.

1 · Airport and settings
Transition altitude (representative)
—
Extra events (scenario)

You can add events by hand too. The purple one was picked by the system.

Live METAR

Loading METAR…

2 · Listen

–
—
—

Mohamed Boudiaf ATIS — Frequently asked questions

What is the Mohamed Boudiaf ATIS frequency?

The ATIS on this page is for training. The official ATIS frequency for Mohamed Boudiaf International Airport (DABC) is published in the country's AIP (AD 2.18).

How do I listen to the Mohamed Boudiaf ATIS?

The real ATIS is received on a VHF airband radio near the airport. On this page you can play a training ATIS generated from the current DABC METAR with the "Listen" button, copy it down and check your answers.

Which runways does Mohamed Boudiaf use?

Mohamed Boudiaf International Airport runways: 16/34, 13/31. Airport elevation 2265 ft. The runway in use depends on the wind and is announced on the ATIS.

Where can I see the DABC METAR and TAF?

The current DABC METAR/TAF decoded in plain English, runway crosswind components and nearest airports are at https://sonyaklasma.com/en/airport/DABC.

3 · Copy the ATIS

The copy sheet a pilot fills in while listening to the ATIS. Hide the text, listen, fill in the fields, then check.

ATIS at nearby major airports

Every major airport has its own ATIS page, generated from its current METAR. Or type any ICAO code in the airport list above.

ATIS message order follows ICAO Annex 11 / SERA.9010: airport name → ARR/DEP → letter → observation time → approach type → runway in use → runway surface → transition level → other essential information → wind (magnetic) → visibility/RVR → weather → cloud → temperature → dew point → QNH → recent weather / wind shear → trend → “acknowledge receipt”.

How does it work?

The current METAR of the selected airport is decoded. The wind is converted from true to magnetic (about 6° east variation in Turkey), the runway most into wind becomes the “runway in use”, and the transition level is worked out from a representative transition altitude and the QNH. The letter comes from the observation time. The text is read in a loop with ICAO pronunciation (3 = tree, 9 = niner), recorded English voice clips and a VHF radio effect.

Test yourself

ATIS, METAR and radio phraseology questions come up in the Meteorology and Communications subjects of PPL and ATPL exams.

Practice ATPL questions →

This simulator is for training only. Values are representative and do not replace the aircraft’s official POH/AFM, the AIP or current weather information in real flight operations. The pilot in command is always responsible.

ATIS Trainer: Listen to ATIS from Live METAR: the full explanation

Published: · Updated: · By: Son Yaklaşma editorial team

What is ATIS?

ATIS (Automatic Terminal Information Service) is a continuous, looping radio broadcast at busy airports that gives pilots the weather, runway in use, approach type, transition level and essential operational information. Pilots listen to it before calling the tower or approach, copy it down and quote its letter on first contact: “…with information Bravo”. The controller no longer has to read the same details to every aircraft, which keeps the frequency clear.

Each broadcast has a letter (Alfa, Bravo, Charlie…). When the weather report is updated, or the runway or approach changes, a new broadcast is recorded and the letter moves on. Large airports may have separate arrival (ARR) and departure (DEP) ATIS frequencies.

ATIS versus METAR

Order of an ATIS broadcast

Standard ATIS order (ICAO Annex 11 / SERA.9010), arrival example
#ItemExample phraseWhy it matters
1Airport, ARR/DEP and information letterThis is Istanbul Airport arrival information BravoWhich broadcast you are listening to and its letter.
2Observation time (UTC)time 1350Time of the METAR the broadcast is based on.
3Approach typeExpect ILS approach runway 35RThe approach to expect (arrival ATIS).
4Runway in useRunway in use 35RLanding/departure runway, usually the one most into wind.
5Runway surface / brakingRunway surface wetWet, snow or ice information.
6Transition levelTransition level FL130Where to change from 1013 to QNH on descent.
7Other essential informationCaution, bird activity…Birds, works, closed taxiways, LVP, NOTAM items.
8Wind (magnetic)Wind 010 degrees 12 knotsATIS wind is magnetic; METAR wind is true.
9Visibility / RVRVisibility 7 kmHorizontal visibility and RVR when relevant.
10Present weatherLight rain showersPrecipitation, fog, mist, thunderstorms.
11CloudCloud few 1800 ft cumulonimbus, broken 2500 ftCloud bases above aerodrome level.
12Temperature and dew pointTemperature 15, dew point 13Key for icing and fog risk.
13QNHQNH 1018Altimeter setting in hPa.
14Recent weather, wind shearRecent rain / Wind shear reportedSignificant weather in the last hour and reported wind shear.
15TrendNo significant changeOutlook for the next 2 hours (NOSIG, BECMG, TEMPO).
16ClosingAcknowledge receipt of information Bravo…Report the letter on first contact.

Worked example

METAR: METAR LTFM 231350Z 02005KT 300V080 7000 -SHRA FEW018CB BKN025 15/13 Q1018 NOSIG, transition altitude 12,000 ft.

“This is Istanbul Airport arrival information Bravo, time 1350. Expect ILS approach runway 35R. Runway in use 35R. Runway surface wet. Transition level FL130. Caution, cumulonimbus cloud in the vicinity of the airport. Wind 010 degrees 5 knots, varying between 290 and 070 degrees. Visibility 7 km. Light rain showers. Cloud few 1800 ft cumulonimbus, broken 2500 ft. Temperature 15, dew point 13. QNH 1018. No significant change. Acknowledge receipt of information Bravo and advise aircraft type on first contact.”

Example ATIS copy (for the worked example above)
FieldNote
LetterB (Bravo)
Runway35R
Wind (magnetic)010/05
Visibility7000
CloudFEW018CB BKN025
Temp/Dew point15/13
QNH1018
Transition levelFL130

How to listen and copy an ATIS

ICAO number pronunciation

Numbers are read digit by digit: QNH 1018 is “one zero one eight”, runway 35L is “tree five left”. 3 is tree, 9 is niner. Heights use hundreds and thousands: 2,500 ft is “two thousand five hundred feet”.

The broadcasts on this page are generated automatically from the METAR; the letter, runway in use, transition altitude and extra events are for practice. The official source for ATIS information and frequencies in Turkey is the AIP Turkey.

How to copy an ATIS

  1. Tune the ATIS frequency. Find the arrival or departure ATIS frequency in the AIP or on the chart and listen before calling ATC.
  2. Write the letter first. Note the information letter (Alfa, Bravo…) and the observation time.
  3. Copy the runway and approach. Write the runway in use, the expected approach and the transition level.
  4. Copy the weather. Wind (magnetic), visibility/RVR, weather, cloud, temperature/dew point and QNH.
  5. Note warnings and trend. Mark bird activity, wind shear, closed taxiways and the trend.
  6. Quote the letter on first contact. Tell ATC you have the information: “…with information Bravo”.

Frequently asked questions

What is ATIS in aviation?

ATIS (Automatic Terminal Information Service) is a continuous broadcast of weather and operational information at an airport, updated whenever conditions change. Each version has a letter that pilots quote on first contact.

Is ATIS wind true or magnetic?

ATIS and tower winds are given in magnetic degrees so they can be compared directly with runway headings. METAR and TAF winds are relative to true north.

How often does ATIS change?

Usually every 30 or 60 minutes with each new METAR, and at once when the runway, approach or an important condition changes. The letter moves on with every new broadcast.

What is the transition level on an ATIS?

The lowest flight level available above the transition altitude. When descending through it you change the altimeter from 1013 hPa to the local QNH.

Can I use this ATIS for real flights?

No. The broadcasts are generated for training from a real METAR, but the runway, approach, letter and events are simulated. Always use the airport’s official ATIS, the AIP and NOTAMs.

Sources

More calculators

–—