QFE

Abfrage: Flugplatzhöhe

PPLATPL Meteorologie
IN SHORT

QFE is the atmospheric pressure measured at aerodrome elevation. When set on the altimeter, it shows 0 ft when the aircraft is on the runway and height above the aerodrome when airborne.

Was ist QFE?

An altimeter set to QFE gives height directly above the aerodrome. For this reason it is preferred mainly in circuit traffic and at some military aerodromes: if circuit height is 1,000 ft, the altimeter also reads 1,000 ft.

At an aerodrome at sea level, QFE and QNH are almost the same. The difference grows as the aerodrome elevation increases, by about 1 hPa for every 27 to 30 ft. In Turkish civil operations QNH is generally used; QFE can be requested from the tower if needed.

Beispiel

Flugplatzhöhe 900 ft, QNH 1015 → QFE ≈ 1015 − 900/27 ≈ 982 hPa.
TEST YOURSELF

With the altimeter set to QFE, it reads 1,000 ft in circuit traffic. What does this indicate?

So wird im ATPL-Examen gefragt: 3 Fragen

Denke über deine Antwort nach und decke sie dann auf.

Die theoretischen Prüfungen der EASA werden auf Englisch abgelegt, daher werden Fragen und Antwortmöglichkeiten auf Englisch angezeigt. Öffne die Übersetzung unter jeder Frage, falls du sie brauchst; die Erklärungen stehen in deiner Sprache.

1. You need the aerodrome QFE setting. How should you ask for it using correct phonetic spelling?

  1. request Quebec Foxtrot Echo
  2. request Quebec Fox Echo
  3. request Queen Fox Easy
  4. request Quebec Fox Easy
🌐 Deutsch · Übersetzung anzeigen

Sie benötigen die QFE-Einstellung des Flugplatzes. Wie fragen Sie danach unter Verwendung der korrekten Buchstabiertafel?

  • A) Anfordern Quebec Foxtrot Echo
  • B) anfordern Quebec Fox Echo
  • C) anfordern Queen Fox Easy
  • D) Quebec Fox Easy anfordern
Lösung anzeigen

Richtige Antwort: request Quebec Foxtrot Echo

QFE wird mit dem phonetischen Alphabet buchstabiert: Quebec Foxtrot Echo. Jeder Buchstabe muss mit den standardisierten ICAO-Buchstabierwörtern deutlich ausgesprochen werden.

2. To calculate QFE from a known QNH value, what information must you have?

  1. Elevation and the temperature at the airfield.
  2. Elevation of the airfield.
  3. Elevation of the airfield and the temperature at MSL.
  4. Temperature at the airfield.
🌐 Deutsch · Übersetzung anzeigen

Um QFE aus einem bekannten QNH-Wert zu berechnen, welche Information muss man haben?

  • A) Höhe und Temperatur am Flugplatz.
  • B) Höhe des Flugplatzes.
  • C) Höhe des Flugplatzes und Temperatur auf MSL.
  • D) Temperatur am Flugplatz.
Lösung anzeigen

Richtige Antwort: Elevation of the airfield.

Nur die Flugplatzhöhe wird benötigt. Das Standardatmosphärenmodell liefert die Druckänderung pro Höheneinheit, sodass die Höhe allein ausreicht, um QNH zurück in QFE umzurechnen.

3. Which statement about QNH and QFE is correct?

  1. QNH is always equal to QFE
  2. QNH can be equal to QFE
  3. QNH is always higher than QFE
  4. QNH is always lower than QFE
🌐 Deutsch · Übersetzung anzeigen

Welche Aussage zu QNH und QFE ist korrekt?

  • A) QNH ist immer gleich QFE
  • B) QNH kann gleich QFE sein
  • C) QNH ist immer höher als QFE
  • D) QNH ist immer niedriger als QFE
Lösung anzeigen

Richtige Antwort: QNH can be equal to QFE

QNH und QFE können auf Meereshöhe gleich sein, aber QNH ist auf größeren Höhen meist höher als QFE, da QFE nur der Druck auf Flugplatzhöhe ist.

Löse 10 kostenlose Fragen zu diesem Thema →

Frequently asked questions about QFE

What is the difference between QFE and QNH?

At an aerodrome at sea level, QFE and QNH are almost the same. The difference grows as the aerodrome elevation increases, by about 1 hPa for every 27 to 30 ft.

Is QFE used in Türkiye?

In Turkish civil operations QNH is generally used. QFE can be requested from the tower if needed.

Maschinell übersetzt (KI) aus unserem Turkish glossary entry unter Verwendung der ICAO/EASA-Terminologie. Aktualisiert am 16. Nov 2026 · Fehler melden: [email protected]