Minimum Descent Gradient

ATPLIR Instrumentenflug
IN SHORT

Minimum Descent Gradient is the minimum rate of descent a pilot must maintain during an approach so that obstacles are cleared safely. It is specified in the approach procedure.

What is Minimum Descent Gradient?

Minimum Descent Gradient (MDG) is the minimum rate of descent, set during the design of an approach procedure, that the pilot must maintain. This gradient is calculated to clear all obstacles under the approach path (mountains, buildings and obstacles defined on the chart) with a specified safety margin. MDG is typically expressed as a percentage (%) and is shown on the approach chart (Approach Plate).

The pilot must maintain this minimum gradient while also meeting Stabilised Approach conditions. If the aircraft descends below the MDG, the risk of controlled flight into terrain (CFIT) increases. MDG is especially critical in low visibility conditions (IMC, low cloud ceiling) and in non-precision approaches. In precision approaches (such as ILS), the glide path is controlled by the Glide Slope, but the pilot must still know the MDG.

MDG is calculated in accordance with ICAO standards and determined by the approach procedure designer. The pilot must be able to read the MDG value given on the approach plate and check whether the aircraft's performance meets this requirement.

Beispiel

On the Approach Plate: if "MDG 3.5%" is shown, the pilot must maintain a descent gradient of at least 3.5% (a descent of 35 feet for every 1000 feet of horizontal distance). For example, at 5 NM: 5 × 6076 feet × 0.035 = 1063 feet of descent required.
TEST YOURSELF

In an approach procedure the MDG is stated as 3%. At 6 NM from the FAF, what altitude should the pilot be at? (FAF altitude 2000 ft MSL)

Frequently asked questions about Minimum Descent Gradient

How is the MDG read on the approach plate?

The MDG value is shown as a percentage on the approach chart (Approach Plate). The pilot must maintain this minimum gradient and check whether the aircraft's performance meets this requirement.

What happens if the aircraft descends below the MDG?

If the aircraft descends below the MDG, the risk of controlled flight into terrain (CFIT) increases. MDG is especially critical in low visibility conditions and in non-precision approaches.

Is MDG information needed for an ILS approach?

In precision approaches, such as ILS, the glide path is controlled by the Glide Slope, but the pilot must still know the MDG.

Maschinell übersetzt (KI) aus unserem Turkish glossary entry unter Verwendung der ICAO/EASA-Terminologie. Aktualisiert am 18. Nov 2026 · Fehler melden: [email protected]